User manual BLACK & DECKER KA161K

[. . . ] www. blackanddecker. com 1 2 6 3 9 4 8 5 7 UK Ireland Australia New Zealand 1 10 11 10 A 4 8 5 11 14 C 4 B 4 8 7 12 8 6 D 9 E 9 7 7 F1 2 F2 13 9 H 2 G I 1 J 3 Intended use Your Black & Decker sander has been designed for sanding and polishing wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Safety instructions x x x x Warning!When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. Read all of this manual carefully before operating the tool. [. . . ] x Never use the tool without a sanding base. x Hearing protection should be worn whenever the sound level seems uncomfortable. Sanding lead-based paint or MDF Sanding of lead-based paint is not recommended due to the difficulty of controlling the contaminated dust. The greatest danger of lead poisoning is to children and pregnant women. Any pre-1960 building may in the past have been painted with paint containing lead. This paint may be covered with additional layers of paint. Before starting work, it is important to determine whether the paint to be sanded contains lead. This can be done using a test kit or by a professional decorator. Personal protection x Do not let children or pregnant women enter the work area. x Wear a dust mask specifically designed for protection against lead paint dust and fumes and ensure that persons within or entering the work area are also protected. x Do not eat, drink or smoke in the work area. Do not store any food or drink in the work area. x Wash yourself very carefully before eating, drinking or smoking. Environment x Remove the paint in such a way that the amount of dust is minimised. x Seal the work area with plastic sheeting. x Minimise the amount of dust outside the work area. Cleaning x Thoroughly vacuum and clean all surfaces in the work area every day. x Regularly change the dustbag and filters of the vacuum cleaner. x Thoroughly wash any foreign objects exposed to dust before using them again. Additional safety instructions for Australia and New Zealand x This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance. x If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Features This tool includes some or all of the following features. Sanding profiles In addition, this tool is supplied with some or all of the following accessories: Recommended application and use Coarse grit sandpaper Fast paint, varnish and rust removal Medium grit sandpaper Paint, varnish and rust removal Fine grit sandpaper Surface blending and finishing Extra fine grit sandpaper Sanding between coats Detail sanding tips Corners and hard to reach places 1 OT polishing/ Polishing metals, stripping stripping wool varnish and glass cleaning Grey foam pad Applying and removing polish Red non-woven pad Heavy scrubbing and rust removal Grey abrasive paper Polishing plastics Contour attachments Curves and profiles Accessory - Assembly Warning! [. . . ] x To switch the tool on, press the part of the on/off switch (1) marked `I'. x To switch the tool off, press the part of the on/off switch (1) marked `0'. Accessories The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool. Maintenance Your tool has been designed to operate over a long period of time with a minimum of maintenance. [. . . ]