User manual BLACK & DECKER KA199

[. . . ] Uk KA199 ENGLISH (Original instructions) 3 6 A B 1 2 2 C D 5 6 5 10 8 8 6 9 7 E 2 (Original instructions) ENGLISH Your BLACK+DECKER KA199 random orbital sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Intended use Safety instructions General power tool safety warnings @ Warning!Read all safety warnings and all instructions. [. . . ] This tool is not intended for use by persons (including Safety of others u This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. U Children should be supervised to ensure that they do not play with the appliance. Additional power tool safety warnings Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock u Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. Additional safety warnings for sanders Residual risks. Contact with or inhalation of dusts arising from sanding applications may endanger the health of the operator and possible bystanders. Wear a dust mask specifically designed for protection against dust and fumes and ensure that persons within or entering the work area are also protected. u u Thoroughly remove all dust after sanding. Take special care when sanding paint which is possibly lead based or when sanding some woods and metal which may produce toxic dust: u Do not let children or pregnant women enter the work area. U Do not eat, drink or smoke in the work area. u Dispose of dust particles and any other debris safely. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. U Injuries caused when changing any parts, blades or accessories. u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. U Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF. ) Vibration The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure. [. . . ] D) u To lock the tool OFF, make sure the paddle (1) is not Protecting the environment depressed and push the slider (2) right to the locked position. The paddle cannot be depressed while switch is in locked position. U To unlock the paddle, push the slider left to the unlocked position. Should you find one day that your BLACK+DECKER product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. [. . . ]