User manual BLACK & DECKER KA220E

[. . . ] ® KA200 KA210 KA220 KA230 Congratulations!On the purchase of your Black & Decker multi sander. To ensure the best results from your multi sander please read these safety and usage instructions carefully. If you have any questions or queries after reading this user manual please do not hesitate to call our Service and Information Centre, whose number you will find towards the back of this user manual, or one of our Authorised Repair Agents. A list of these Agents and further information is available on the Internet at www. 2helpU. com. 2 Contents Page 4 Page 5 Safety instructions Additonal precautions to take when sanding paint and MDF Personal safety Environmental safety Cleaning and disposal Double insulation Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Our after sales service policy Accessories Technical data Features Operating your multi sander Variable speed control Using your multi sander as a random orbital sander Fitting the round base Fitting the sandpaper (round base) Using your multi sander in the orbital mode Fitting the pointed base Reversing the pointed base Fitting the sandpaper (pointed base) Tip components (pointed base) Fitting the profile base Fitting the sanding profile Fitting the sanding paper (profile base) Removing the side handle Adjusting the side handle Dust extraction Emptying the dustbag Automatic brake system (ABS) Handy hints EC declaration of conformity Black & Decker phone numbers and addresses Guarantee card 3 Page 6 Page 7 Page 8 Page 9 Multi sander user manual SAFETY INSTRUCTIONS Warning! [. . . ] • Only fit BS1363A approved plugs fitted with the correctly rated fuse. Note: Fuses do not give personal protection against electric shock. • The cable wire colours, or a letter, will be marked at the connection point of most good quality plugs. Attach the wires to their respective points in the plug (see diagram). Brown is L (live) and blue is N (neutral). Fit a plug approved to BS1363A N E L Fit a 5 amp fuse Connect blue to N (neutral) Make sure that the outer sheath of the cable is held Connect brown to L (live) 230 volts AC only. Never use firmly by the clamp a light socket • Before replacing the top cover of the plug ensure that the cable restraint is holding the outer sheath of the cable firmly and that the two leads are correctly fixed at the terminal screws. If the fuse cover is missing or damaged do not use the plug. For replacement or detachable fuse covers, contact a Black & Decker service agent. Never connect live or neutral wires to the earth pin marked E or . MAINS PLUG REPLACEMENT (AUSTRALIA AND NEW ZEALAND ONLY) Should the mains plug or cordset of the product be damaged, it must only be replaced by an authorised 5 ENGLISH Black & Decker service agent because special purpose tools are required. EXTENSION CABLES Up to 30m (100ft) of 3-core extension cable can be used without undue loss of power. Note: An extension cable should not be used unless absolutely necessary. Use of an improper extension cable could result in a risk of fire and electric shock. If an extension cable must be used, make sure it is properly wired, contains the correct rated fuse as recommended in its literature and is in good electrical condition. UNWANTED TOOLS AND THE ENVIRONMENT Should you find one day that the tool needs replacement or is of no further use, think of the protection of the environment. Black & Decker service agents will accept old tools and will dispose of them in an environmentally safe way. THE BLACK & DECKER GUARANTEE (UK, AUSTRALIA AND NEW ZEALAND ONLY) If the Black & Decker product becomes defective due to faulty materials and workmanship, within 24 months from the date of purchase, we guarantee to either replace all defective parts or at our discretion, replace the unit free of charge provided that: • The product is returned to us or our authorised repairers with evidence of date of purchase. • The product has not been used for trade, professional or hire purposes. • The product has not been subjected to misuse or neglect. • The product has not sustained any damage through foreign objects, substances or accidents. • Repairs have not been attempted by anyone other than our authorised repair agents. This guarantee is offered as an extra benefit and is additional to the customers statutory rights. AFTER SALES SERVICE FOR YOUR BLACK & DECKER PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY) Black & Decker offers a nationwide network of authorised service agents. [. . . ] This feature gives you optimal control as it keeps the speed of the disc below that of the motor when your sander is not on the work surface. When your sander is switched off, the disc stops very quickly. HANDY HINTS You can hold your multi sander in various positions for maximum comfort but make sure you do not block the air intake slots. REMOVING THE SIDE HANDLE Proceed as follows: Turn the handle anticlockwise and unscrew completely. ADJUSTING THE SIDE HANDLE Proceed as follows: Loosen the handle slightly. [. . . ]