User manual BLACK & DECKER KR705K

[. . . ] Ae KR705 KR805 KR806 KR1001 ENGLISH 5 6 7 4 3 2 1 8 7 8 A 2 ENGLISH 12 13 10 9 10 B 6 C 11 6 Intended use Your Black & Decker impact drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving purposes. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning!Read all safety warnings and all instructions. [. . . ] The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury and/or damage to property. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: • • Injuries caused by touching any rotating/moving parts. Injuries caused when changing any parts, blades or accessories. injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF. ) • • • • • • • • Vibration The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure. The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated. When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. €¢ • Safety of others • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. €¢ Residual risks Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Labels on tool The following pictograms are shown on the tool: 5 ENGLISH Warning!To reduce the risk of injury, the user must read the instruction manual. setting the drilling depth (fig. A) • Slacken the side handle (8) by turning the grip counterclockwise. Set the depth stop (7) to the desired position. The maximum drilling depth is equal to the distance between the tip of the drill bit and the front end of the depth stop. [. . . ] Regularly open the chuck and tap it to remove any dust from the interior (when fitted). €¢ Selecting the direction of rotation For drilling and tightening screws, use forward (clockwise) rotation. For loosening screws or removing a jammed drill bit, use reverse (counterclockwise) rotation. €¢ To select forward rotation, push the forward/reverse slider (4) to the left. [. . . ]