User manual BLAUPUNKT ACD 9850

[. . . ] 22 Selecting the station search sensitivity . 22 Separate adjustment of the sensitivity levels for local and distant reception . 23 Automatically storing the strongest stations with Travelstore . 25 Summary of default settings made at the factory . [. . . ] - Press preset button 3 twice; the display shows "2420". - Press preset button 4 once; the display shows "2521". To confirm the code number: Press the rocker button . When turning the radio off during the waiting time, this period is reset and will start anew as soon as the unit is switched on again. Press preset buttons 1 and 4 simultaneously, hold down and turn the set back on again. Now enter the code number of the car radio passport and confirm (see example under "Restart . Switching the code system on To activate the code system: · Turn off the radio. Press preset buttons 1 and 4 simultaneously, hold down and turn the set back on again. The display briefly shows "CODE" before the set is switched on. In future, "CODE" will always be briefly displayed each time the radio is turned on. Switching the code-LED on/off When the car is stationary, you may let the LED below the display flash for additional theft protection. Buttons to activate the Use the desired mode. Now your car radio is ready for operation. However, if the display again shows four dashes, you have made a mistake. In this case go ahead entering the correct code number after the waiting period has elapsed ("CODE" in the display). 20 REG - regional program Certain radio programs are split up at times into regional programs offering local information. The 1st program broadcast by NDR, for example, offers programs with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to one program and move to an area where another linked regional program becomes stronger, the unit will switch to that program. If you wish to continue listening to the first station, · Press the AF button for approximately 2 seconds. "REG ON" appears in the display. AF - Alternative frequency The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected program is always tuned in automatically. This function is activated when "AF" appears in the display. [. . . ] The disc is automatically pulled into the set to reach the playback position. Press the / SRC button for more than 2 seconds. To protect the CD mechanism, the automatic insertion or ejection of the disc must not be impaired in any way. The Mix function When the Mix function is activated, all CD titles will be played in random order. [. . . ]