Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT ACD2800. We hope that this BLAUPUNKT ACD2800 user guide will be useful to you.
Lastmanuals help download the user guide BLAUPUNKT ACD2800.
Detailed instructions for use are in the User's Guide.
[. . . ] Attention: Pay attention that the cables do not contact with the housing. Connection with in-vehicle system plugs
Removal of the car radio
Insert the brackets right and left into the provided trimplate holes and push in until you hear a distinct click (lateral springs are unlocked). Note Locked brackets can only be removed after taking out the unit. [. . . ] 4
Ground cable Do not connect the ground cable to the negative pole of the battery. Route the ground cable to a suitable ground point (car body screw, car body metal sheet) and shorten it accordingly. Remove the insulation from the ground cable and attach the forked cable lug (if necessary, solder it). Scratch off the paint from the contact area of the ground point and lubricate it with graphite grease (important for good ground contact). Positive cable (ACC + 12 V) (ignition)
+12V
Do not use the positive/negative system connectors provided in the vehicle!For connecting all positive and negative wiring, use connection cable 7 607 884 093, fig. Some Mercedes vehicles are equipped with a 10-pin connector located in the installation compartment. Connect the fuse holder to protect the positive cable and connect it to the positive pole of the battery (if necessary, drill a hole into the fire wall and use cable ducts). control cable (Power Antenna +)
+12V per. +12V
The control cable represents the switched positive output for external components, e. Do not connect the control cable to pin 15 (switched +) or pin 30 (permanent +12 V). amplifiers , equalizers , or motor antennas. Modifications reserved
Preparation of car radio installation
Install the car radio into the DIN cut-out provided in your car's dashboard ex factory. Prepare the car radio DIN cut-out (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. [. . . ] Prepare the car radio DIN cut-out (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cut-out and check how many of the fixing strips of the car radio support can be bent. note: Try to bend as many fixing strips as possible. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT ACD2800
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT ACD2800 will begin.
