User manual BLAUPUNKT ACS2501

[. . . ] 7 Switching on/off . . . . . . . . . . . . . . . . . . . . . . . . . 8 Volume adjustment . . . . . . . . . . . . . . . . . . . . . 9 Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting the tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when trying to play copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Single CDs with a diameter of 8 cm and CDs which are not circular ("shape CDs") should not be used. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. sure until you feel it latch into place. If there is already a CD in the drive, press the SRC button @ repeatedly until "CD" appears on the display. Playback begins from the point at which it was last interrupted. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS CD Mode Close the panel using light pres- Selecting a track Press one of the buttons on the arrow block : to select the next or previous track. If the or button : is pressed once, the current track is played again from the beginning. Quick track selection To quickly select tracks backwards or forwards, keep one of the buttons : pressed until fast reverse / forward track selection begins. Starting CD mode If there is no CD in the drive, Press the button 9. Gently insert the CD into the CD compartment with the printed side uppermost until you feel some resistance. Do not hinder or assist the drive as it draws the CD in. Fast search (audible) For a fast search backwards or forwards keep the buttons : pressed until the fast search backwards or forwards begins. 15 CD MODE Random play (MIX) Press the button 5 MIX >. "MIX CD" appears briefly on the display, the MIX symbol lights up. If the CD in the player contains no CD text, "NO TEXT" will appear on the display when the CD text function is activated. Switching CD text on/off Press the or button : twice. You are now in the edit mode. If the CD you have selected is still unnamed, eight underlines appear on the display. The current input position flashes. Use the buttons : to select your characters. If a position is left blank, you have selected the underline. Use the or button : to proceed to your next input position. ; to save the name entered. Press the MENU button 8 or OK Clearing a CD name Listen to the CD whose name you wish to clear. Press the MENU button 8. Press the button : repeatedly until "CD TEXT" appears on the display. Switch on the CD text function by pressing the buttons : ("CD TEXT ON") or off ("CD TEXT OFF"). Press the MENU button 8. Use the buttons : to select "CD NAME". When you have completed the setting procedure, press the MENU button 8 or OK ;. Press the or button :. 17 CD MODE Removing a CD Press the button 9. The flip/release panel opens to the front and the CD is ejected. MP3 MODE MP3 mode You can also use this car radio for playing CD-Rs and CD-RWs containing MP3 music files. MP3 is a process developed by the Fraunhofer Institute for compressing CD audio data. Compression allows data to be reduced to around 10% of their original size without a noticeable loss in quality (at a bit rate of 128 Kbit/s). If a lower bit rate is used to convert CD audio data to MP3, you can create smaller files but there will be a loss in quality. Carefully remove the CD and close the flip/release panel. Preparing the MP3-CD The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the ability to play certain CDs. [. . . ] Observe las normas de seguridad dadas por el fabricante del vehículo. - Al perforar agujeros, asegúrese de no dañar ninguna pieza del vehículo. - La sección transversal del cable positivo y del cable negativo no debe ser menor de 1, 5 mm2. - ¡No conecte a la radio los conectores ubicados en el vehículo! [. . . ]