User manual BLAUPUNKT ALICANTE CD30

[. . . ] Radio / CD Alicante CD30 Kiel CD30 Lausanne CD30 Operating instructions 2 1 3 4 5 6 14 13 7 12 11 10 9 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 1 2 Button to release the control panel FM button ­ selects the FM memory FMT button ­ Travelstore (not on the Kiel CD30) Volume control ON button ­ switches the unit on/off RDS button ­ switches the RDS function on/off M·L button ­ selects the MW and LW frequency ranges TS button ­ activates the Travelstore function on the Kiel CD30 CD compartment CD eject CD·C button ­ selects CD, radio and CD changer (if connected) sources AUDIO button ­ sets bass and treble LD button ­ switches the loudness function on/off Arrow buttons GEO button ­ sets balance and fader MENU button ­ opens the basic settings menu Buttons 1-5 TRAFFIC button ­ activates/ deactivates traffic information standby 3 4 5 6 7 8 9 : ; < = > 22 CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the volume was set to maximum before the unit was switched off and the power-on volume is set to 0, the volume level can be very high when the unit is switched on again. 27 Remove the control panel. The unit switches off. Attach the control panel again. The unit switches on. The settings (radio, CD or CD changer) that were set before the unit was switched off will be reactivated. q Switching on/off using button 4. To switch the unit on, press button 4. To switch the unit off, press button 4 for longer than two seconds. VOLUME ADJUSTMENT When you have finished making your changes, press the MENU button <. RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Nearly all receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as it is received. The programme type can be displayed if required. Read the section entitled "Programme Type (PTY)" for further details. Mute setting This feature allows you to instantaneously reduce the system volume (mute). Press button 4. Setting the mute level You can set the unit's mute level. Pressing the MENU < button. The RDS functions are active when "RDS" lights up in the display. When the RDS functions are switched on, "REG ON" or "REG OFF" appears briefly in the display. Press the MENU button <. Keep pressing the : button until "SENS" appears in the display. The display shows the currently set value for sensitivity. "SENS HI6" means that the tuner is highly sensitive. "SENS LO1" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Selecting the frequency range / memory This unit can receive programmes broadcast over the UKW (FM), MW and LW frequency ranges (MW and LW are not available on the Kiel C30). There are three preset memory levels for the FM range and one for each of the MW and LW ranges. Five stations can be stored on each memory level. Selecting the UKW (FM) memory Press the Set the required sensitivity using the and buttons :. When you have finished making your changes, press the MENU button <. Press the FMT or FM 2 button to switch between the various UKW memory levels. 29 RADIO MODE Tuning into stations manually You can also tune into stations manually. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only FM). The stations are stored in the FMT memory. Note: Stations that were previously stored in this memory are deleted in the process. Press either the or button :. Note: You can only tune into stations manually if the RDS function is first deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Keep the FMT button 2 pressed for longer than two seconds or briefly press the TS button 6 on the Kiel CD30. The automatic station storing procedure begins. [. . . ] Playback is continued. CLOCK Displaying the time To briefly display the time, press the MENU button < until the time appears in the display. DEUTSCH Time (CLOCK) Selecting 12/24-hour clock mode Press the MENU button <. "MENU" appears in the display. Setting the time manually The time is set automatically using the RDS signal. However, if you cannot receive any RDS stations or the RDS stations that you listen to do not support this feature, you can also set the time manually. Press the When you have finished making your changes, press the MENU button <. Press the button :. Set the minutes using the buttons :. and Press the Once you have set the minutes, press the button :. The hours now flash on and off. or button : to switch between the settings. your changes, press the MENU button <. Set the hours using the buttons :. and your changes, press the MENU button <. 37 PORTUGUÊS When you have finished making ESPAÑOL When you have finished making SVENSKA The time appears in the display. [. . . ]