User manual BLAUPUNKT AMSTERDAM NAV35E WW GR

[. . . ] 60 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Telephone mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To do so · press TU and NEXT one after the other and then the PTY key. To start Preset Scan: · Press TU and PS one after the other. All of the stored stations on the waveband selected and within reception range will be scanned one after the other. "PS SCAN" and the station name or frequency will flash alternately in the DOT display. Recalling stored stations You can recall any stored station at the touch of a button. FM Recall the stations on the waveband selected directly: · by pressing keys 1 - 6. To select a station on a different waveband: · Press NEXT as often as necessary until the desired memory bank appears and then select the station by pressing keys 1 - 6. Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press TU, menu level 2 will appear in the display. · 70 Press TS briefly. To select a scanned station and switch off Preset Scan: · Press the rocker switch briefly. You can also scan all of the stations within reception range. Radio Scan cannot be started unless PTY is switched off ("PTY" is not highlighted in the display). If necessary, switch off PTY on menu level 2. This feature allows you to select FM stations according to their program type. After you have chosen the PTY of your preference, the corresponding stations can be selected by seek tuning. Switching PTY on/off · · Press TU and NEXT one after the other. Light Music Classics Other Music Weather Finance Children's Programs Social Affairs Religion Phone in Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Document Checking the program type of the station You can check the type of program the station you are tuned into is broadcasting. To do so, · press DIS repeatedly until the PTY program type appears in the top line of the display. If "No PTY" appears in the display, the current station has no PTY code. Press PTY to switch the function on or off. The red arrow will light up when PTY is switched on. In addition, "PTY" will appear under the top line in the display. When the function is active, the program type selected last will briefly appear in the display, e. g. As long as PTY is active, "PTY" will appear permanently in the display. 72 Selecting and storing PTY program types When PTY is switched on, it is possible to display the last PTY selected and the stored program types for approx. One program type is stored on each of the station presets 1 to 6 at the factory. Display the program types by · pressing << or >>. [. . . ] 90 Amplifier Output power: 4 x 25 W RMS power acc. power AF ­ Alternative Frequency In RDS this function ensures that the radio always tunes into the frequency with the best reception for the station. AUD ­ Audio Sound settings for bass and treble, balance (left/right) and fader (front/rear). 87. 5 ­ 108 MHz 531 ­ 1602 kHz 153 ­ 279 kHz 0. 7 µV at 26 dB signal-to-noise ratio. [. . . ]