User manual BLAUPUNKT ARIZONA CM148

[. . . ] 2 Dispiay The display consists of three fields and changes according to the operating mode and function. . "`-*%w:w\ y_. lj i \a, *" Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e. g. Pl) Cassette mode CAS - cassette inserted Chanaer mode (Chanaer sold separately) Current track Display field 2: Radio mode Radio frequency or station name Clock display Cassette mode TAPEl/TAPE2 - side of tape being played. Clock display Chanaer mode (Chanaer sold seoaratelv) Display field 3: Displays active functions. - Stereo - Cassette inserted Disc - CD changer connected E - Loudness CT, Radio mode lo - Seek tuning sensitivity Chanaer mode (Changer sold separately) RPT - Repeat function MIX - Tracks played at random Numeric and graphic representation of the volume and audio settings. CD number being played by changer. [. . . ] Press >> again to select time display. Press A Cassette playback Insert the tape into the slot with the open side showing to the right. If a tape is already inserted, press SRC to select the tape deck mode. "TAPEl" or "TAPE2 will appear. The tape will be played in the direction previously selected. Reversing the tape To change the tape direction during cassette playback: Press FR/FF simultaneously. Tke display shows "TAPEl", or "TAPE2" for the selected tape side. l Cassette eject Press P to eject the cassette. The cassette buttons will automatically retract. Fast winding Press the FF or FR button to fast forward or rewind the tape during cassette operation: "FORWARD" or "REWIND" will light up in the display. When the end of the tape is reached with fast forward, the tape direction will change and the other side of the tape will played. With "Radio Monitor ON" during fast winding you can listen to the radio program you selected previously. It is possible to change the Radio Monitor on/off setting in the DSC mode. (Refer to "DSC programming - RM". ) / v to set the minutes. Press << to activate the hours. If you would like to set TIMER 2 as well, repeat the steps as described above. Note The timers can be turned on and off while any audio source is in use. 13 CD changer operation (optional) This unit offers you the ability to conveniently control a Blaupunkt CDC-A08 or CDC-A071 changer (or CDC-A05 with a special adapter), all sold separately. If a CD changer is connected, the c%% symbol will light up in the display. The changer is equipped with a magazine for 10 discs. Switching to the CD changer mode Make sure that at least one CD has been inserted into the magazine. l Press SRC to change the audio source: Press SRC repeatedly until the CD functions appear in the display. h I v CD selection A UP V Down The CD number being played will appear in the display. Ejecting a CD Inserting a CD Insert one or several CDs into the magazine (printed surface facing up). Slide the magazine into the CD changer in the direction of the arrow. The CDs are counted from bottom to top. Note: Open the door of the CD changer and press the eject button. Selecting a track CD playback l Use only perfectly circular CDs with a diameter of 12 cm!CDs with a diameter of 8 cm or CDs manufactured in the shape of a mug, for example, are not suitable for use with this equipment. Using such CDs can very likely result in the destruction of the CD and the CD drive. t We assume no responsibility for damages caused by using unsuitable CDs. After you have inserted the magazine, keep the door of the magazine closed to prevent contamination. 14 Press SIX to select the CD changer. [. . . ] With the detachable face off, place the receiver into the mounting bracket and push it in until the side springs snap into position on the left and right. To remove the receiver, see the maintenance section on the next page. Fig. 2 GB5 Installing the Receiver in a Japanese Car This receiver is designed for easy installation in most popular Japanese cars that have "ISO" (sidebracket) mounting system. If you have questions, ask your Blaupunkt dealer. [. . . ]