User manual BLAUPUNKT ASPEN AG FUER DJ

[. . . ] Changer mode CD number being played by changer. CD time (elapsed time) Brief indication of functional changes DSC Serves as display and entry field during DSC programming Clock display Miscellaneous Indicates new source (e. g. when changing from radio to cassette) Display field 3: Displays active functions. - Stereo - Cassette inserted - CD changer connected - Loudness LD Radio mode AF PTY TA TP lo - RDS alternative frequency - RDS programme type - Priority for traffic information - Traffic programme station - Seek tuning sensitivity CD changer mode RPT - Repeat function MIX - Titles played at random ESPAÑOL 23 PORTUGUÊS SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH Display Contents Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The power antenna will retract, if it doesn't, press ON again. Do not drive into the car wash unless the power antenna has retracted! This car radio is equipped with a built-in clock. Display priority: To switch the display priority, press the button until you hear a beep. Press as many times until the desired display mode is active (not during radio reception). Radio mode button briefly to display the Press the clock. Cassette mode Press this button to switch the display between the cassette direction and clock indication. Changer mode Press the button briefly to switch the display between the CD number, playback time and clock indication. Theft protection This unit is equipped with a detachable control panel. A car radio without control panel is worthless for thieves. Protect your car radio and detach the control panel when you leave your car. It is very easy to attach and detach the release panel thanks to its specific design. Note: Do not pull the release panel straight out from the chassis, but detach it as illustrated below. The display will indicate which preset button is currently activated. Scrolling through the broadcasting networks (FM only) You can use the << >> buttons to tune into stations in your reception area. If it is possible to receive several programmes in the same broadcasting network, you can scroll through them in the forwards direction by pressing >>, or backwards using the << button, e. g. For this to work properly you must have already tuned into the stations at least once and "AF" must be active (lights up in the display). 32 Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the BA/TS button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the strongest station. If desired, stations can also be stored man- Storing stations On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T). On MW/LW, you can also store six stations each (Zermatt RCM 149 without MW, LW). ually in the Travelstore bank (see "Storing stations"). Recalling stored stations You can recall any stored station at the touch of a button. [. . . ] The number of the selected title appears beside "T" (track). ITALIANO "MIX" appears in display field 3 as long as the MIX function is active. "MIX-CD" or "MIX-ALL" lights up briefly in display field 2 when you activate this function and each time the title changes. FRANÇAIS The SCAN function will also be cancelled by pressing any other button, except for the volume controls and the AUD and ON buttons. The following options are possible: Mix all titles of one CD ("MIX-CD") or Mix all titles of all CDs ("MIX-ALL"). ENGLISH To stop the Scan function: · Press SRC/SC briefly. The track currently scanned will continue to play. MIX You can have the CD titles played in random order. DEUTSCH DSC programming The car radio has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. [. . . ]