User manual BLAUPUNKT AUGUSTA AG45

[. . . ] 24 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Second KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Scrolling through the broadcasting networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · First, slightly push in the KeyCard. This releases the card and puts it in the proper position for being removed. · Now you can pull it out. Putting the unit into operation Turn on the set. With the KeyCard tongue sticking out, introduce the KeyCard into the slot with the contact area showing up. The car radio is now ready for operation. If a wrong KeyCard is inserted, then "CARD ERR" followed by "WAIT" will appear in the display. In this case please do not make any further adjustments. · · Press the DSC button and select "LEARN KC" with / . · Press << or >>. The display will switch to "CHANGE". 25 PORTUGUÊS ESPAÑOL While operating the unit with the first KeyCard, you can "train" a second one to be also used with the set: · Insert the first KeyCard and turn on the set. SVENSKA "Training" a second KeyCard/ Replacing a KeyCard Displaying the radio pass data Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6. . ) and serial number indicated on the display panel. Please refer to chapter "DSC programming - READ KC". NEDERLANDS ITALIANO FRANÇAIS The system will switch off after approximately 10 seconds. For more information, refer to chapter "DSC programming - REG ON/ OFF". DEUTSCH Radio operation with RDS (Radio Data System) Station tuning Automatic tuning · / Press / ; the car radio will automatically search for the next station. When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction. Manual tuning: · Press << >>. The frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up. Changing the memory bank You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. · Press the TS/FM or TS/BND button as many times until the desired memory bank lights up in the display. Scrolling through the broadcasting networks You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e. g. For this it is necessary that the stations have been tuned in at least once and that "AF" is active (lights up in the display). For this purpose, start automatic tuning, e. g. using Travelstore: · Press TS/FM or TS/BND for 1 sec. ; the system starts to run through the frequency band. If "AF" does not light up, · press AF/TA for approximately 1 sec. [. . . ] The display will show you the adjusted condition. READ KC To read out the KeyCard data. The KeyCard supplied with the radio is used to display the model name, type number (7 6. . ) and the serial number. Using the second KeyCard to be purchased at any specialised dealership it is possible to display the Short Additional Memory (S. A. M. ) data entered by the dealer. See chapter "Short Additional Memory S. A. M. ". ITALIANO DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. [. . . ]