Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT AUTOFUN - . We hope that this BLAUPUNKT AUTOFUN - user guide will be useful to you.
Lastmanuals help download the user guide BLAUPUNKT AUTOFUN - .
Detailed instructions for use are in the User's Guide.
[. . . ] To ensure no interference is caused, antenna cables must be laid at a sufficient distance from cable harnesses. Use cable grommets to protect cables against sharp-edged holes. [. . . ] When carrying out the installation, the inner surface of the windscreen and the components that are going to be stuck to it must have a temperature of at least 18 °C. After you remove the protective foil from the carrier paper of the two reception elements and from the mounting base, make sure that you do not touch the adhesive surfaces or else the adhesive strength will diminish!You must make absolutely sure that the inside surface of the screen where the antenna will be installed is completely dry!The amount of space available (see point 3) The earth connection (see point 7) How the antenna cable will be laid (see point 6) Attach the special mounting tool to the base and hold it in positions A and B to try out the different installation positions. Peel off the protective paper from the mounting base, then align the base in the correct position and press it onto the windscreen. Carefully detach the mounting tool from the base and rub the base onto the windscreen using the wiper. Attach the adhesive spacer strips 1 to the windscreen so that they are positioned right up against the edge of the windscreen. Place the hole end of the reception element 3 over the peg protruding from the mounting base whilst making sure that the adhesive side of the reception element is facing the windscreen. Continue applying the carrier paper along the windscreen in such a way that the outer edge of the carrier paper is positioned up against the ends of the spacer strips 1. Use the wiper to rub the reception element firmly against the windscreen. 50 mm (if necessary, shorten the reception elements using a knife). Place the transparent end patches onto the tip of the wiper and apply them to the beginning and end, and rub them down so they stick securely. [. . . ] This connection is protected by a fuse and the antenna is activated when the car radio is switch on. Anslut matarströmledningen till ett strömuttag med + 12 V, lämpligen till bilradions autom. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT AUTOFUN -
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT AUTOFUN - will begin.
