User manual BLAUPUNKT BARCELONA CM 102

[. . . ] Operation Instructions Barcelona CM 102 2 3 4 5 6 7 8 9 10 11 12 13 14 1 22 21 20 19 18 17 16 15 KEY C ARD Display Radio 18 Display Cassette 18 Display CD-Changer 18 a b c de f g i h jk 3 Front Panel Description 1 ON/OFF Switch on the set by turning the knob. Volume control: by turning the knob SCAN (search operation): Pressing the button briefly samples the stations during radio reception or the next song during tape or CD operation (only CD changer). 2 GEO button (broader interior sound impression) Balance (left/right volume): Adjust with rocker switch <</>> D. Fader (front/rear volume): Adjust with rocker switch / E. [. . . ] Balance For balancing the sound level left/right: q Press the GEO button 2. The display B a gives you BAL (Balance) or FAD (Fader) plus a number between -9 and +9. q Press the rocker switch <</>> D left/ right. The sound of the left and right 22 Radio Section Switching from Stereo to Mono For switching from stereo to mono: q Press the lo button 6 for more than two seconds. For stereo reproduction, the stereo sign will light up on the display B f. When switching the unit on, stereo sound reproduction is adjusted. When the signal strength gets poor, the set will automatically switch to mono. Selecting the Desired Waveband With your car radio you have free choice from the following wavebands: FM (ultra-short wave; frequency-modulated), MW (medium wave), and LW (long wave). Selecting FM q Briefly press the 3FM A or TS button @. "FM" lights up on the display B b. Selecting MW or LW q Briefly press the M·L button ?. `M' for MW or "L" for LW lights up on the display B b. For changing between MW and LW: q Press M·L ?If nothing else is indicated, the following operating notes hold for all wavebands. Manual Tuning All stations can also be tuned in "manually": q Press the rocker switch <</>> D on the left or the right. For FM, each preset button > can be allocated four times, i. e. four stations can be stored on one button. The display B c shows you the corresponding assignments (I, II, III stand for first, second, and third allocation; T stands for Travelstore (for Travelstore information see the following chapter). For changing the storage level: q Press the 3FM button A. to select the fourth storage level "Travelstore", press the TS button @. For storing a station: q select the storage level (FM only). For this, press 3FM until the display B c shows I, II or III, or press the TS button @. q Tune in the station (see chapter Automatic/Manual Tuning of Stations) q Press the desired preset button > until the broadcast becomes audible again (approx. 2 seconds). Automatically Storing the Strongest Stations (Travelstore) With Travelstore, you have the opportunity to automatically store the six strongest FM stations of your respective region and have them sorted according to their signal strength. [. . . ] q Choose the desired station (via the preset buttons), for which the name is to be entered. The frequency is indicated on the display B a. All free digits are represented by dashes. _ _ 89. 60 _ _ The first dash is blinking. [. . . ]