User manual BLAUPUNKT BOLOGNA C50

[. . . ] 28 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 International telephone information . 28 DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Important information . . . . . . . . . . . . 29 Theft protection system . . . . . . . . . . . . . . . . . [. . . ] If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears! Once you have selected the desired settings, press MENU 8 or OK ;. 31 VOLUME CONTROL Adjusting the volume of the beep For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e. g. if you want to store a radio station on a station preset. You can adjust the volume level of this beep. RADIO OPERATION Radio operation This car audio system has been equipped with an RDS radio receiver. Many FM radio stations now transmit the RDS signal, which contains such other information as the station name and the program type (PTY) along with their regular station programming. As soon as the car radio receiver detects the station name, it will appear in the display. It is also possible to display the program type. For more information, refer to the section on "Program Type (PTY)". Press MENU 8. Press : repeatedly until "BEEP" appears in the display. Press : to adjust the volume. "0" means the beep volume is off, "9" means the beep volume is adjusted to the maximum volume. This car radio has been equipped to receive and display this information. These program types can include: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function, you can select the radio station according to the type of program being broadcast. As soon as the radio registers a radio station broadcasting the program type Press one of the station preset buttons from 1 to 6 > to select the program type stored on that particular station button. The program type selected will appear briefly in the display. Press or : to start seek tuning. The next radio station broadcasting the program selected will begin to play. 35 RADIO OPERATION Note: If the radio is not able to find a station broadcasting the program type selected, you will hear a beep and "NO PTY" will appear briefly in the display. The station selected previously will then resume play. Storing the program types on the station preset buttons Selecting the display of variable text A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names. These "variable texts" will appear in the display. It is possible to adjust your radio so that these "variable texts" do not appear. Press or gram type. : to select the pro- Press and hold down RDS 4 until "NAME FIX" appears in the display. Press the desired station preset button 1 to 6 > for longer than two seconds. The program type selected will then be stored on the station preset button 1 to 6 > pressed. To have the "variable texts" displayed again, press and hold down RDS 4 until "NAME VAR" appears in the display. Optimising radio reception Interference-related treble cut (HICUT) The HICUT function improves reception when reception begins to deteriorate. [. . . ] or : to alter the Loudness setting. Press Once you have completed adjusting the settings, press MENU 8 or OK ;. Press Press ance. : until "BALANCE" appears in the display. or : to alter the bal- Adjusting the fader To adjust the fader, press AUD / LD =. "BASS" will appear in the display. Press Press : until "FADER" appears in the display. or : to alter the fader. 44 EQUALIZER This car audio system is equipped with a parametric 2-band equalizer. [. . . ]