User manual BLAUPUNKT BREMEN MP74

[. . . ] Radio / CD / MP3 Bremen MP74 7 644 820 310 Operating instructions http://www. blaupunkt. com Open here 2 1 2 3 13 4 12 5 11 6 10 9 8 7 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS 1 Button, to switch the device on/ off, and mute the device's volume Volume control button, to unlatch the detachable control panel NEXT button to display the next pages of a menu, and switch memory banks in radio mode Softkeys, the function of the softkeys depends on what is currently being displayed DIS·ESC button to change the display content and close menus button to open the detachable control panel (flip-release panel) Joystick and OK button 9 MENU button to open the basic settings menu (short press) Activate/deactivate demo mode (long press) AUDIO button to adjust the bass, treble, balance, fader and X-BASS (short press) Access the DSA Max Equalizer (Long press) Display SOURCE button to start CD / CD-changer playback, start playing the Compact Drive MP3 (only if connected) or To play an external audio source (only if connected) TUNER button to select radio mode directly To access the radio functions menu (only possible in radio mode) 2 3 4 : 5 ; < 6 7 8 = 58 CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Safety notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] "NO TIM AVAILABLE" appears briefly in the display if no messages have been recorded. After the last message is played, the device returns to its previous mode of operation. If you want to return to radio mode without first listening to all the messages, press the TUNER button = or the joystick OK 8. Selecting TIM messages "TIM" and the message number are displayed on both sides of the display alongside the top two softkeys. If you want to listen to one of the displayed messages without listening to the other messages: DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH whilst you are in radio mode, press and hold down the TUNER button = for longer than two seconds. The TIMPLAY menu is displayed. Press the NEXT button 4. The TIMSET menu is displayed. Repeatedly press the softkey 5 assigned to the "TIM ON" display item until "TIM RECORD ON" appears in the display. Press the TUNER button = or the joystick OK 8. Note: After you switch off the device via the vehicle ignition or using button 1, the display will briefly show the current setting ("TIM ON" or "TIM OFF"). Press the softkey 5 assigned to the corresponding display item: "TIM1", "TIM2", "TIM3" or "TIM4". Listening to stored traffic messages To listen to the stored traffic messages, Recording traffic information messages Whilst the device is switched on it automatically records traffic information if it is receiving a traffic information station and priority for traffic information messages is activated. If you are listening to a station that does not broadcast traffic information and you switch the device off whilst the TIM func81 whilst you are in radio mode, press and hold down the TUNER button = for longer than two seconds. The last message is played if traffic information messages have been record- TIM tion is activated, the device will automatically search for a traffic information station. To save the settings, press the TUNER button = or the joystick OK 8. Whilst TIM standby is activated, an electric antenna that is connected to the device will remain extended. Note: Before you drive into a carwash, please make absolutely sure you switch off TIM. For further details, please read the section entitled "Switching off TIM" in this chapter. Setting the timers If TIM is activated, the traffic information messages provided by a tuned traffic information station will be recorded for 2 hours after the device is switched off. Furthermore, you can set two timers that record all the traffic information messages received 30 minutes before and 90 minutes after the set time. The timer function uses the system time as its reference. For details on setting the system time, please read the chapter entitled "CLOCK - time". To set one of the timers, Selecting a timer Once you have set the timers, you can then select which of the two timers to activate. Generally, the timer that you adjusted last is active. To select a timer, whilst you are in radio mode, press and hold down the TUNER button = for longer than two seconds. The TIMPLAY menu is displayed. Press the NEXT button 4. The TIMSET menu is displayed. whilst you are in radio mode, press and hold down the TUNER button = for longer than two seconds. The TIM PLAY menu is displayed. Press the softkey 5 assigned to the "TIMER1" display item for the first timer or "TIMER2" for the second timer. The set time appears in the display, and the hours flash. Press the NEXT button 4. The TIMSET menu is displayed. Press the softkey 5 assigned to the "TIMER1" display item to select the first timer or "TIMER2" to select the second timer. Move the joystick 8 up or down to adjust the hours. Move the joystick 8 to the right to change the input position. [. . . ] The AUX menu is displayed. Naming the AUX input You can give each AUX input a name so you can recognise them more easily when selecting them using the SOURCE button < (e. g. you can give them the device names that they are connected to). Press the softkey 5 assigned to the "AUX1" display item if no CD changer is connected and you want to connect an external audio source. Press the MENU button 9. Press the softkey 5 assigned to the "AUX" display item. The AUX menu is displayed. 106 EXTERNAL AUDIO SOURCES Press the softkey 5 assigned to the "EDIT" display item under "AUX1" or "NAV/AUX2". [. . . ]