User manual BLAUPUNKT BREMEN MP78

[. . . ] 2 NEXT button Selects FM memory banks or changes between SW, MW and LW wavebands in radio mode. 4 SOURCE button Source selection between radio and (if inserted, connected or switched on) CD, SD/MMC, USB, CD changer and AUX 5 Volume control 6 to ; Softkeys To select functions and menu items in the different operating modes (radio, CD, MP3, CD changer) and in the menu for basic settings. the respective function of a softkey is shown next to the softkey on the display. For further details, please read the section "Display elements" on the next page. [. . . ] The master telephone has a higher priority than the other registered telephones: · If the device is switched on, it first attempts to establish a connection with the master telephone. Only if the master telephone is not available, does the device attempt to establish a connection with the telephone registered last. If you register a sixth Bluetooth device, the one registered first is unregistered. During the process, the master telephone always remains registered, even if it is the first registered Bluetooth device in the list. Instead, the next Bluetooth device in the list is unregistered. The selected telephone is defined as master telephone and identified by an "M". To delete the master telephone, u select the master telephone in the list with the or button @ or the ; or 9 softkey. Note: After the deletion, no telephone is defined as master telephone. However, the former master telephone remains registered. In the Bluetooth menu, you can manage the registered Bluetooth devices (cell phones and devices such as MP3 player). Note: If a connected Bluetooth player is currently selected as audio source, the display shows the note "STREAMING 131 If you want to disconnect a Bluetooth player that is currently selected as audio source or unregister it, the display shows the note "STREAMING DEVICE PLAYING ­ Disconnect anyway?" Press the OK button B to disconnect the player, or the MENU button A to cancel the process and to return to the menu. The "Disconnect" function is only available to the currently connected Bluetooth device, the "Connect" function only for the other registered Bluetooth devices. If you are receiving a call, the display shows "Incoming call" and the phone number of the caller or his entry in the phone book. If the number of the caller is not being transmitted, the display shows "Private Number". the active audio source is muted and the ring tone is sent to the loudspeakers. In case of an incoming call, you can answer or reject the call. At this time, it is not possible to perform another operation using the car sound system. To reject the call, u press the softkey with the red telephone icon :. the display shows "CALL ENDED". To answer the call, u press the softkey with the green telephone icon 7. Note: During the Bluetooth phone call, no traffic or navigation announcements are switched through. [. . . ] Tryck i sådana fall på knappen NEXT 2 en gång till för att komma tillbaka till MP3-teckenfönstret. Gå till den överordnade mappen För att gå från den aktuella till den överordnade mappen, u tryck på knappen >. För att växla direkt till en bestämd CD, u växla vid behov med knappen NEXT 2 till CD-översikten. Bilradion upprättar automatiskt en Bluetooth-anslutning till den mobiltelefon som senast kopplades och som står till förfogande. [. . . ]