User manual BLAUPUNKT BRIGHTON MP35

[. . . ] Radio / CD / MP3 Brighton MP35 Essen MP35 7 645 160 510 7 645 150 510 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 11 10 9 8 7 2 CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 Button to switch the device on/ off and operate the volume mute function. button SRC Short press: Switch sources between CD/MP3, CD changer (if connected) and AUX. Long press: Briefly display the clock time. Volume control CD compartment TRAF RDS button Short press: Switch traffic-information standby on/off. [. . . ] Press the or button 7 repeatedly until "PTY ON" or "PTY OFF" appears in the display. Press the or button 7 to switch PTY ON or OFF. Press the Press the MENU button 8. 38 RADIO MODE HICUT The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the interference level is cut automatically. Switching HICUT on/off DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Optimising radio reception Press the MENU button 8. Press the or button 7 repeatedly until "TUN DISP" appears in the display. Press the or button 7 to switch between "CLOCK" and "FREQUENCY". Press the MENU button 8. Press the or button 7 repeatedly until "HICUT" appears in the display. or button 7 to adjust the HICUT setting. "HICUT 0" means that the interference level will not be cut automatically. "HICUT 1" means that it will be cut automatically. Press the MENU button 8 twice. Press the Press the MENU button 8. Configuring the display In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select "FREQUENCY" to display the station name / frequency or select "CLOCK" to display the waveband together with the memory bank / memory location and the clock time. 39 TRAFFIC INFORMATION Traffic information Your device is equipped with an RDSEON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme you were listening to before. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements Press the MENU button 8. Press the or button 7 repeatedly until "TA VOLUME" appears in the display. Switching traffic information priority on/off Briefly press the TRAF button 6. Traffic announcement priority is active when the traffic-jam symbol lights up in the display. Note: You will hear a warning beep: if you leave the reception area of a traffic information station that you are currently listening to. if you are receiving a traffic information station and the volume is set to minimum (0) or if, whilst listening to a CD/MP3, a CD in the changer or an AUX source, you leave the reception area of the tuned traffic information station and the subsequent automatic search cannot find a new traffic information station. Adjust the volume using the buttons 7. When you have finished adjusting the setting, press the MENU button 8 twice. Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. You can set the volume distribution for the traffic announcements. For further details, please read the "Sound" chapter. 40 CD MODE You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Contoured CDs (shape CDs) are not suitable for playback in this unit. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. [. . . ] When you have finished adjusting the setting, Press the Press the AUDIO button 9. "BASS" appears in the display. Press the button 7 repeatedly until "XBASS" appears in the display together with the current setting. press the AUDIO button 9. or button 7 repeatedly until the setting that you want appears in the display. When you have finished adjusting the setting, Press the press the AUDIO button 9. 52 LEVEL DISPLAY Configuring the level display The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. When you are not changing any settings, the level display depicts the peak music/speech output. You can switch the level display on/off. EXTERNAL AUDIO SOURCES Instead of connecting a CD changer, you can connect another audio source equipped with a line output. [. . . ]