User manual BLAUPUNKT BT DRIVE FREE 111

[. . . ] Use the return and collection systems available to dispose of the old device. Do not discard any batteries in the household trash; instead, return them to the corresponding collection sites. This hands-free system designed specifically for users who prefer the freedom of wireless communication. This device can be used as conference or office equipment as well as in the car. [. . . ] the LED starts to alternately flash red and blue. ­ Activate the Bluetooth function on your cell phone and look for "Audio accessories". (For further details, please read the operating instructions your cell phone. ) ­ Select "BT DF 111" from the displayed list. ­ Upon request to enter the PIN code, enter "0000" and confirm with "OK". After successful pairing, you will hear a long sound and the LED is on for approx. The device is now in standby mode, which is indicated every 3 seconds by the blue LED flashing briefly. (Note: The PIN code is preprogrammed and cannot be changed). ­ The range between cell phone and the device is limited to 10 m. The shorter the distance, the better the connection. IMPORTANT: If the pairing is not completed within 2 minutes, the LED goes out and the device switches off again. In this case, start the pairing from the beginning. If you want to connect the BT Drive Free 111 with other cell phones, you must first disconnect this connection. IMPORTANT: If the connection is lost, the BT Drive Free 111 sends three sounds every minute. After 10 minutes, the BT Drive Free 111 completely switches off. After the pairing has been successfully performed and the battery has been charged, the following functions can be performed: ­ Call answering To answer a call, briefly press the MFB button or the answer button of your cell phone. ­ Ending a call Briefly press the MFB button or the end button of your cell phone. ⭠Rejecting a call Hold the MFB button pressed for approx. ­ Call transfer From BT Drive Free 111 to cell phone: During a phone call, press the volume buttons +/­ at the same time to transfer the call to the cell phone. From cell phone to BT Drive Free 111: Press the MFB button and the call is transferred. [. . . ] ⭠Ensure that the Bluetooth function is activated on your cell phone. ­ Check whether the distance between the devices is less than 10 m or whether walls or other electronic devices are located between them. ­ Should none of these steps be successful, remove the battery from the BT Drive Free 111 for approx. ­ If none of these measures is successful, please contact the service department of your distributor. [. . . ]