User manual BLAUPUNKT BT DRIVE FREE 112

[. . . ] Bluetooth is a wireless communication technology with short range. It enables wireless connections between all compatible portable and stationary communication devices. The technology is based on a radio connection that ensures a fast and reliable transmission of voice and data information. Bluetooth is oriented to the worldwide applicable standard for operating in the internationally recognised ISM frequency band (Industrial Scientific & Medical). [. . . ] Switching off To switch the unit off, press the MF button for approx. 3 seconds until you hear a low-pitched signal tone and the MF button lights red. Afterwards, the device is switched off. 7 Registering (pairing) and connecting with the cell phone Before you can use the BT Drive Free 112, you must register and connect it with a Bluetooth-ready cell phone. Registering is a one-time process and required only for the first connection with the cell phone. The BT Drive Free 112 can be registered with up to eight cell phones and be connected simultaneously with two cell phones. ­ Hold the BT Drive Free 112 within range of a Bluetooth-ready cell phone; the distance should not exceed a metre. ­ The BT Drive Free 112 must be switched off. 6 seconds until you hear a low-pitched signal tone and the MF button intermittently flashes red and blue. ­ Activate the Bluetooth function of the cell phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your cell phone). ­ From the list of devices found, select the "BT DF 112". ­ If required, enter the PIN code "0000" and confirm the entry. If the pairing process was successful, you hear a signal tone and the MF button lights blue for 3 seconds. (Note: The PIN code is preprogrammed and cannot be changed. ) ­ After registering, the BT Drive Free 112 automatically connects with the cell phone. For some cell phones, you have to manually confirm the connection. Next, the BT Drive Free 112 changes to standby mode and the MF button flashes blue every 3 seconds. Note: If the registering is not completed within 2 minutes, the BT Drive Free 112 switches off again. In this case, repeat the registering. 8 Multi-connection function The multi-connection function allows the simultaneous use of the BT Drive Free 112 with two cell phones. This is advantageous for users with a personal and a business cell phone. Establishing a connection with two cell phones There are several options of connecting the BT Drive Free 112 with already registered cell phones. ­ Automatic connection When switching on the BT Drive Free 112, a connection is automatically established with the two most recently connected cell phones. ­ Establishing a connection via the BT Drive Free 112 To manually establish a connection between the BT Drive Free 112 and the two most recently connected cell phones, press the MF button. The BT Drive Free 112 first connects itself with the most recently connected cell phone. [. . . ] The declaration of conformity can be found on the Internet under www. blaupunkt. com. Warranty We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. The warranty terms can be called up from www. blaupunkt. com. 13 Technical data Bluetooth specification Supported Bluetooth profiles Version 2. 1 + EDR (Enhanced Data Rate) + SSP (Secure Simple Pairing)* HSP (Headset Profile), HFP (HandsFree Profile) and A2DP (Advanced Audio Distribution Profile) 2. 4 to 2. 48 GHz ISM band Up to 10 metres (Class 2) 110 (L) x 48 (W) x 15 (H) mm approx. 3 hours up to 15 hours up to 500 hours Lithium-ion, 3. 7 V, 500 mAh, rechargeable, replaceable (compatible with Nokia battery BL-5B) 5 V - 6 V DC, 300 mA Frequency range Bluetooth range Dimensions Weight Battery charging time Talk time Standby time Battery type Charger * For registering hands-free systems without entering the PIN code if the other Bluetooth device also supports version 2. 1. Subject to change! 14 FCC-Statements All following FCC statements are valid for the Industry Canada Standard (IC) as well. General Interference Warning: (according to FCC part 15. 19) This device complies with Part 15 of the FCC Rules. [. . . ]