User manual BLAUPUNKT BT DRIVE FREE 411

[. . . ] 8 Registering (pairing) and connecting with the cell phone . 9 Establishing a connection with two cell phones . 14 2 BT Drive Free 411 This wireless Bluetooth hands-free system was developed specifically for users who want to use their cell phone while driving. The BT Drive Free 411 is conveniently attached to the steering wheel. [. . . ] Registering is a one-time process and required only for the first connection with the cell phone. The BT Drive Free 411 can be registered with up to eight cell phones and be connected simultaneously with two cell phones. ­ Hold the BT Drive Free 411 within range of a Bluetooth-ready cell phone; the distance should not exceed a metre. ⭠The BT Drive Free 411 must be switched off. ­ Press the MF button for approx. 6 seconds until you hear a low-pitched signal tone and the MF button intermittently flashes red and blue. ­ Activate the Bluetooth function of the cell phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your cell phone). ­ From the list of devices found, select the "BT DF 411". ­ If required, enter the PIN code "0000" and confirm the entry. If the pairing process was successful, you hear a signal tone and the MF button lights blue for 3 seconds. (Note: The PIN code is preprogrammed and cannot be changed. ) ­ After registering, the BT Drive Free 411 automatically connects with the cell phone. For some cell phones, you have to manually confirm the connection. Next, the BT Drive Free 411 changes to standby mode and the MF button flashes blue every 3 seconds. Note: If the registering is not completed within 2 minutes, the BT Drive Free 411 switches off again. 8 Multi-connection function The multi-connection function allows the simultaneous use of the BT Drive Free 411 with two cell phones. This is advantageous for users with a personal and a business cell phone. Establishing a connection with two cell phones There are several options of connecting the BT Drive Free 411 with already registered cell phones. ­ Automatic connection When switching on the BT Drive Free 411, a connection is automatically established with the two most recently connected cell phones. ­ Establishing a connection via the BT Drive Free 411 To manually establish a connection between the BT Drive Free 411 and the two most recently connected cell phones, press the MF button. The BT Drive Free 411 first connects itself with the most recently connected cell phone. [. . . ] Change between the active call and the one on hold. End the active call and answer the call on hold. Continue the active call and end the call on hold. You are conducting two calls, an active one and one on hold Press the MF button for 2 seconds. [. . . ]