User manual BLAUPUNKT BT HS 112

[. . . ] 7 Registering (pairing) and connecting with the cell phone . 8 Establishing a connection with two cell phones . 14 Bluetooth Headset BT HS 112 The Bluetooth Headset BT HS 112 allows a wireless connection with Bluetoothready cell phones for hands-free telephone calls with excellent sound quality. The headset can be connected with two cell phones at the same time. [. . . ] ­ Hold the BT HS 112 within range of a Bluetooth-ready cell phone; the distance should not exceed a metre. ⭠The BT HS 112 must be switched off. ­ Press the MF button for approx. 5 seconds until you hear a low-pitched signal tone and the LED display intermittently flashes red and blue. ­ Activate the Bluetooth function of the cell phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your cell phone. ) ­ From the list of devices found, select "BT HS 112". ­ If required, enter the PIN code "0000" and confirm the entry. If the pairing process was successful, you hear a signal tone and the LED display flashes blue 3 times. (Note: The PIN code is preprogrammed and cannot be changed. If the cell phone supports the Secure Simple Pairing (SSP) function, you do not have to enter a PIN code for the pairing. ) ­ After registering, the BT HS 112 automatically connects with the cell phone. For some cell phones, you have to manually confirm the connection. Next, the BT HS 112 changes to standby mode and the LED display flashes blue every 3 seconds. Note: If the registering is not completed within 2 minutes, the BT HS 112 switches off again. 8 Establishing a connection with two cell phones The BT HS 112 can be connected with two cell phones at the same time. ­ Automatic connection When switching on the BT HS 112, a connection is automatically established with the two most recently connected cell phones. ­ Establishing a connection via the BT HS 112 To manually establish a connection between the BT HS 112 and the two most recently connected cell phones, briefly press the MF button. The BT HS 112 first connects itself with the most recently connected cell phone. Then it connects itself with the next most recently connected one. ­ Establishing a connection via the cell phone If the cell phone is not one of the two most recently connected cell phones with the BT HS 112, you have to establish the connection via the Bluetooth menu of the cell phone. After successful connection, you can establish another connection with a second cell phone. [. . . ] You receive a call during an active call Hold the active call and answer the incoming call. End the active call and answer the incoming call. Continue the active call and reject the incoming call. Change between the active call and the one on hold. [. . . ]