User manual BLAUPUNKT CALAIS MP48

[. . . ] 1 Volume control 2 BND button Short press: Selects the memory bank or waveband Long press: Starts the Travelstore function (FMT or MWT/LWT) 3 On/Off button Short press: Switches the device on In operation: Muting (Mute) Long press: Switches the device off 4 CD eject button 5 CD tray 6 Display 7 MENU button Calls up the menus for basic settings. Before placing your device into operation, carefully read these instructions and familiarise yourself with the device. You can connect the Blaupunkt USB interface to play MP3/WMA files from a USB data carrier. Do not dispose of your old device in the household trash! [. . . ] If a CD is already inserted in the drive, u press the SRC button > repeatedly until "CD" appears on the display 6. Playback begins from the point at which it was last interrupted. CD singles with a diameter of 8 cm and noncircular contoured CDs (shape CDs) must not be used. If a CD should ever accumulate dirt, clean it with a lint-free cloth without using solvents. Always wipe the CD from the inside to the outside. Do not expose the CD to direct sunlight, and keep the CD in a protective case outside the device. label the CD only with suitable commercial markers. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable or damaged CDs. To ensure proper functioning, use only CDs with the Compact-Disc logo. copy-protected CDs can cause playback problems. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!If the CD provides CD text, the information for every track is shown once on the display 6 as scrolling text at the start of the track. Displaying track information once as scrolling text u Press the 5 button <. The CD text for the current track is shown once as scrolling text on the display 6. Note: This function is not available if the display of CD text as scrolling text is switched off (see the following section). Switching the display of track information as scrolling text on/off To switch the display of track information as scrolling text on or off, u press the MENU button 7. With the setting "SCRL OFF", the track information is shown in segments of 8 characters each on the display 6. For this purpose, every text segment as well as track number and playing time are intermittently displayed for 5 seconds each. The next tracks are selected in random order. The track number and playing time of the current track or its track information is displayed. Cancelling SCAN and continuing listening to a track To end the scan process, u press the 4 button < again. If you press the button 8 once, the current track will be played again from the beginning. [. . . ] after every change of the setting , the device is automatically switched off. To switch between the settings "CDC" and "AUX", you must, therefore, first select the "USB" setting and then switch on the device again after the automatic switch-off. Next, repeat the setting process to obtain the desired setting "AUX" or "CDC". Note: If you selected the AUX setting, you can select the AUX input with the SRC button >. [. . . ]