User manual BLAUPUNKT CASABLANCA CD50 U

[. . . ] 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information . . . . . . . . . . . . . . [. . . ] Automatic seek tuning ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Radio operation Tuning into radio stations press CD·C @ repeatedly until "RADIO" appears in the display. Press or :. RDS function This car audio system has been equipped with an RDS radio receiver. Many FM radio stations now transmit a signal which contains such other information as the station name along with their regular programming. As soon as the radio station name is detected, it will appear in the display. The RDS function can be switched on or off. Switching the RDS function on/off The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually. Press or :. Note: You cannot use manual tuning unless the RDS function is deactivated. Paging through the broadcasting network (for FM only) If a radio broadcasting network has more than one station, you can page through the "station network". To take advantage of the RDS function, press RDS 4. When the RDS function has been activated, the RDS symbol will light up in the display. Press or : to tune into the next station in the network. Selecting the waveband/ memory bank The car audio system is able to receive FM and AM radio programs. There are three memory banks for the FM waveband and one memory bank for the AM waveband. Up to six radio stations can be stored on each of the memory banks. Note: To take advantage of this function, you must have activated the RDS function. It is only possible to tune into those stations which have been received once before already. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs. Press MENU 8. Press : repeatedly until "FM TUNER" appears in the display. Press : to select the country. Once you have completed the setting, press MENU 8 or OK ;. Starting CD player operation If there is no CD in the player, 9. press The flip release panel will open. Insert a CD into the player with the label facing up until you feel slight resistance. The CD will be pulled into the player automatically. Do not attempt to assist or prevent this process. Press the operating panel closed gently until you feel it click into place. If there already is a CD inserted into the player, press CD·C @ repeatedly until "CD" appears in the display. Playback will resume at the point where it was interrupted. 14 CD PLAYER OPERATION ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Selecting tracks Press a key on the cursor block : to select the next or the previous track. or : once to restart the Press same track. Stopping the SCAN function, continue listening to the current track To stop the SCAN function, press OK ;. The track currently scanned will continue playing. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Repeating individual tracks (REPEAT) To repeat the track currently playing, press 4 RPT >. "REPEAT TRCK" will appear in the display, the RPT symbol will light up. [. . . ] Before you set the equaliser, set bass, treble, balance and fader to "0" and deactivate the Loudness function. For more information on how to do this, refer to the section on "Tone and balance/ fader". To adjust the level, press :. or To select the next filter, first press OK ; and then or :. Once you have completed making all of the necessary adjustments, press DEQ <. Now listen to the CD you have selected. Evaluate the sound according to your own personal preferences. Now refer to "Sound impression" in the following table. Make the settings for the equalizer as described under "What to do". 22 EQUALIZER You can also select sound presets for the following types of music: CLASSIC POP JAZZ ROCK TECHNO SPEECH The settings for these types of music have already been defined. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Selecting a sound preset Press DEQ <. Press or : repeatedly until "CAR PRESET" appears in the display. Press or : to select the desired car preset. Press DEQ < or OK ;. [. . . ]