User manual BLAUPUNKT CL 210.1

[. . . ] Cassette eject Cassette compartment button, fast winding button, fast winding 9 @ A X-BASS button, to activate the X-Bass function. CD·C button, to select radio, cassette, CD changer (if connected) and AUX sources AUDIO button, to adjust the bass, treble, balance and fader settings. Arrow buttons MENU button, to open the basic settings menu, , to display the time Keys 1 - 5 TRAF button (traffic), to switch traffic information standby on/off PTY, to switch the PTY function on/off Volume control , to increase the volume , to decrease the volume Button to switch the unit on/off, to mute the volume 25 TABLE OF CONTENTS Notes and accessories . . . . . . . . . . 27 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Keep pressing the or button < until "ON VOL" appears in the display. Press the MENU button =. Keep pressing the or button < until "MUTE LVL" appears in the display. When you have finished making your changes, Set the power-on volume using the and buttons <. To help you adjust the volume more easily, the volume will be increased / decreased as you make your changes. If you change the setting to "0", the power-on volume will be the same as the volume level that was set before the unit was last switched off. Set the mute level using the press the MENU button =. Mute during telephone operation If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. The car audio system will be muted to the mute level selected. Note: To protect your hearing, the poweron volume is limited to a value of "38". If the volume level was higher when the unit was switched off, the volume will be reset to "38" when the unit is switched on again. When you have finished making your changes, press the MENU button = twice. 30 ADJUSTING THE VOLUME DEUTSCH Configuring the confirmation beep For some functions you will hear a confirmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio station to a station button you will hear a confirmation beep. Keep pressing the or button < until "SCANTIME" appears in the display. Set the required scantime using the and buttons <. When you have finished making your changes, Listening to preset stations Select the memory or the frequency range. Press the preset station button 1 5 > of the station you want to listen to. press the MENU button = twice. Note: The set scantime also applies to scanning in CD changer mode. Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your radio can receive and display this information. For example, the programme types can be: 34 RADIO MODE CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function, you can directly select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If no station is found that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The station that was listened to last will then be tuned into again. If the tuned radio station or another station on the broadcasting network broadcasts the required programme type at a later point in time, the radio automatically switches from the currently tuned station or from cassette / CD changer mode to the station whose programme type matches the one you selected. Switching PTY on/off DEUTSCH Selecting a programme type and starting seek tuning Press the or button <. If you want to select another programme type, you can do so by pressing the or button < whilst this display is visible. [. . . ] or button < to switch between the ON/OFF settings. When you have finished making your changes, Press the press the MENU button = twice. 42 SOUND AND VOLUME DISTRIBUTION SETTINGS DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Sound and volume distribution settings You can adjust the sound and volume distribution settings separately for each source (radio, cassette, CD changer and AUX). Setting the left/right volume distribution (balance) To adjust the left/right volume distribution (balance), press the AUDIO button ;. "BASS" appears in the display. Adjusting the bass settings To adjust the bass, Keep pressing the Press the button < until "BAL" appears in the display. press the AUDIO button ;. "BASS" appears in the display. When you have finished making your changes, Press the or button < to adjust the balance (right/left). When you have finished making your changes, press the AUDIO button ;. [. . . ]