User manual BLAUPUNKT COBURG CM 62

[. . . ] Operating instructions Coburg CM 62 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 23 22 21 20 19 18 17 20 Radio a b c de f g h j n 20 Cassette i kl m 20 CD-Changer 3 Contents Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Notes on road safety . . . . . . . . . . . . . . . . . . . . . . . . 18 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Telephone operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This function can be adjusted separate- ly for KeyCard 1 and 2. To play another CD or track it is first necessary to switch to the CD track display by pressing the rocker switch for a short moment. using Scan (on/off) 1 If you wish to tune to another station q press the Scan button 1. Starting from the currently received radio programme, the set automatically tunes to the next station frequencies in upward direction and plays them for 8 seconds. During search tuning, the display D a shows "SCAN" and while the radio programmes are previewed the station frequency flashes in the display D a. To select a scanned station q press the Scan button 1 once again. If you do not select a station, the set plays again the radio programme which was tuned in before Scan was activated. using the search tuning rocker switch Start automatic search tuning q by pressing the rocker switch / F. Start search tuning as often as required until the radio programme of your choice is tuned in. 23 PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS ENGLISH If you hold the rocker switch depressed, search tuning continuous quickly. using preset buttons and memory banks This function can be used only, if station frequencies have been stored on the preset buttons as described in chapter "Storing a station". q To recall FM stations, press the FM·T button C until the desired memory bank I, II, III or T is shown in the display D c. q Then press shortly the desired preset button. This function allows you to scan and introduce the stored radio programmes of the selected waveband (in FM mode on all memory banks I, II, III and T). This function can be used only, if station frequencies have been stored on the preset buttons as described in chapter "Storing a station". The set introduces the next preset programme. The programme of this station is played for a short time, then the next preset programme is scanned, etc. If no frequency is stored on a preset button, this preset is skipped. Preset Scan can be used on all wavebands. As soon as you have found the programme of your choice q press PS once again. Preset Scan is switched off. To store a station frequency, q press one of the preset buttons @ until the radio mute is off and the set resumes reproduction of that programme (after about 2 seconds) to indicate that the station is stored. The display D d shows which preset button is pressed. [. . . ] q Press the search tuning rocker switch / F to tune to the next traffic broadcast station. 28 ARI messages during cassette operation This set allows you to listen to a cassette while maintaining reception of traffic messages. When a traffic message is broadcast, cassette playback is stopped and the traffic message switched through. Proceed as follows to activate this function: q Use the ARI button B to switch on the ARI priority. "ARI" is shown in the display D h if the ARI priority is on. [. . . ]