User manual BLAUPUNKT CUPERTINO 220

[. . . ] www. blaupunkt. com Car Radio | CD | USB Cupertino 220 1 011 202 220 / 1 011 202 221 www. blaupunkt. com Operating and installation instructions Controls 1 2 3 4 5 6 7 8 14 13 12 11 10 9 1 button Unlock the detachable control panel Short press: Call up/close menu Long press: Start scan function 8 button (Eject) Eject a CD 2 MENU button 9 USB socket : Front AUX-IN socket ; Keys 1 - 5 < Infrared receiver = SRC button 3 On/Off button Short press: Switch on car sound system In operation: Mute car sound system (Mute) Long press: Switch off car sound system In Fast-Browse mode: Confirm selection 4 Volume control Select memory bank or audio source > DIS button In the menu: Change settings In Fast-Browse mode: Select folder and track 5 CD tray 6 Display 7 Short press: Switch display Long press: Switch display brightness / button In the menu: Select menu item Radio mode: Start seek tuning MP3/WMA/iPod mode: Change to next/ previous folder / button In the menu: Change menu level Radio mode: Adjust the stations Other operating modes: Track selection 2 Contents Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] u Press the button 8 to eject an inserted CD. Notes: · If a CD is ejected and not removed, the drive will automatically draw it back in again after approx. · You can also eject CDs while the car sound system is switched off or whilst another audio source is activated. Connecting/removing a USB data carrier Connecting a USB data carrier u Switch off the car sound system so that the data carrier will be correctly registered. u Pull the protective cap of the USB socket 9 to the front until it moves out of the socket and fold it to the right. If the USB data carrier is initially selected as audio source, the data are read first. Notes: · If the connected USB data carrier cannot be seen, "USB ERROR" is briefly displayed. · The time required for reading in the data depends on the design and size of the USB data carrier. Removing a USB data carrier u Switch off the car sound system so that the data carrier will be correctly unregistered. u Close the protective cap of the USB socket 9. Selecting tracks u Press the / button 7 briefly to change to the previous/next track. Note: If the current track plays longer than 3 seconds, pressing 7 once restarts the track. Selecting a folder (only in MP3/WMA/iPod mode) u Press the / button 7 briefly to change to the previous/next folder. Note: In iPod mode, this allows you to change to the previous/next folder of the current category, e. to the next genre, if you previously selected a track on the iPod via the corresponding genre. 11 CD/MP3/WMA/iPod mode Fast searching u Press and hold down the button / 7 until the desired position has been reached. Repeatedly playing individual tracks or directories u Press the 4 RPT button ; to change among the playback modes: Operation Display CD/ RPT TRACK iPod RPT TRACK MP3/ WMA RPT DIR Gen. RPT OFF Meaning Repeating tracks Repeating tracks Repeating folders Regular playback Interrupting playback u Press the 3 ; button to interrupt the playback ("PAUSE") or to continue it. Scanning all tracks The scan function scans all available tracks. 2 seconds to start the scan, or briefly to continue playing the currently scanned track. During the scan, the display alternately displays "SCAN" and the current track number or file name. Note: The scan time can be adjusted (see the chapter "User settings", section "Making settings in the "VARIOUS" menu", menu item "SCAN"). If the RPT function is switched on, the icon (repeat tracks) or (repeat folders) is shown on the display. Configuring the display u Press the DIS button > once or several times to switch among these displays: Operation Display Meaning Track number and playing time Track number and duration Track number and time File name ² Playing time Track duration Track name ¹ Artist ¹ Album name ¹ Genre ³ Playing tracks in random order u Press the 5 MIX button ; to change among the playback modes: Operation Display CD/ MIX ALL iPod MP3/ WMA Gen. MIX DIR MIX ALL MIX OFF Meaning Mixing tracks Mixing tracks of the current folder Mixing tracks of the data carrier Regular playback T01 00:15 CD T01 03:37 T01 18:30 FILE PLAY 00:15 TOTAL03:37 SONG ARTIST ALBUM GENRE If the MIX function is switched on, the icon MIX (mix all tracks) or MIX (mix tracks of current folder) is shown on the display. MP3/ WMA/ iPod ¹ Track name, artist and album name must be stored as ID3 tag to be able to display them. ² The file name is displayed only in MP3/WMA mode. ³ The genre information is available only on iPod mode. 12 CD/MP3/WMA/iPod mode Browse mode In Browse mode, you can directly search for and select a certain track on the MP3/WMA data carrier or iPod without interrupting the current playback. Browse mode in MP3/WMA mode In MP3/WMA mode, you can select and play a track from a directory of the data carrier. u Press the 1 LIST button ; to call up the browse mode in the MP3/WMA mode. In adThe dition, the icon (folder) or icon (track) appears. [. . . ] power Tuner Wavebands in Europe/Thailand: FM: 87. 5 ­ 108 MHz AM (MW): 531 ­ 1, 602 kHz LW (Europe only): 153 ­ 279 kHz Wavebands in the US: FM: AM (MW): 87. 7 ­ 107. 9 MHz 530 ­ 1, 710 kHz Subject to changes 19 Installation instructions Installation instructions Safety instructions When carrying out installation work and making connections please observe the following safety instructions: · Disconnect the negative terminal of the battery!When doing so, please observe the vehicle manufacturer's safety instructions. · Make sure you do not damage vehicle components when drilling any holes. · The cross sections of the positive and negative cables must not be less than 1. 5 mm². [. . . ]