User manual BLAUPUNKT D-FIRE 01

[. . . ] DAB-Receiver D-FIRE 01 Operating instructions Table of Contents Radio Reception with DAB . . . . . . . . . 13 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 What you should not fail to read . . . . . . . . . . . 14 Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If there is no ensemble available at the set frequency, "NO ENS" appears on the display, alternating with the set frequency. If you set an ensemble which does not fulfil the traffic announcement and programme criteria you have selected, the ensemble name and frequency will appear alternately on the display. No programme will be set. Selecting an Ensemble You can also make a direct selection of known, receivable ensembles. An ensemble is "known" when it has been received at least once before or when information about other ensembles is passed to the receiver via DAB. The ensembles most recently received are saved and therefore known. · Press the rocker switch keys / twice to select the next or previous known ensemble. Selecting a Programme To select a programme while the radio is playing, please press the << >> keys of the rocker switch. The set then switches to the next or the previous programme. Press the rocker switch several times to browse through all the programmes of the current ensemble in ascending or descending order. when the last programme in an ensemble is reached, the search is resumed at the first. Changing Memory Levels You can switch between the memory levels "I", "II" and "T" for storing programmes. · Press FMT repeatedly until the desired memory level appears on the display. 15 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS NB: On long journeys, it may be necessary to carry out a frequency search or DABSCAN (see "Scanning all Receivable Programmes") in order to receive new ensembles, thus making them known to the radio system. ITALIANO FRANÇAIS "ENS " or "ENS " then appears on the display. Once the next ensemble has been found, the ensemble display appears first of all and the first programme is played. If the ensemble located does not contain any programmes with the selected criteria, e. g. TA or PTY, the search continues after three seconds. If no other known ensemble can be received, the frequency search is started. Selecting Subprogrammes If a programme contains subprogrammes, the first subprogramme will be tuned in following programme selection. In addition, the name of the subprogramme, if one exists, appears for three seconds on the display. You can only choose between the various subprogrammes if the programme is stored on a station button (see "Storing Programmes"). When the programme has been stored, · press the station button briefly. The subprogrammes are selected one by one in ascending order with each press of the button. Once the last subprogramme has been reached, the research is resumed at the first. ENGLISH DEUTSCH Storing Programmes You can store six programmes each on three memory levels. · Select a memory level by pressing the FMT button. · · Set an ensemble and a programme as described. Calling up a Stored Programme · · Use the FMT button to set the memory level Hold down the desired station button 1-6 until you hear a "beep". The programme has now been stored. Storing the Programmes of an Ensemble Automatically The "Ensemblestore" function enables you to store the first six programmes of the set ensemble automatically. [. . . ] Press the TA or TIM button to select the menu item TA-OFF. 19 PORTUGUÊS NB: When TA-DB is active, only DAB programmes which support radio announcements will be set. ESPAÑOL · Leave the menu. All traffic announcements received on DAB are now put through. All other audio sources are interrupted. "TP" appears if a DAB traffic programme is received. · Leave the TA menu. [. . . ]