Detailed instructions for use are in the User's Guide.
[. . . ] 33 Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 International telephone information . . . . . . . [. . . ] The settings are then saved.
41
RADIO OPERATION
Saving a station
Saving a station manually
Scanning through stations
Scanning through available stations (radio SCAN) You can listen to short samples from all the stations that can currently be received. The length of the samples can be set, in the menu, at between 5 and 30 seconds. Starting radio SCAN To start the radio scan
Choose the desired memory level from
FM I, FM II, FMT or one of the other wavebands, MW or LW.
Tune in the desired station as described
under "Setting the station".
Hold down the softkey, 4, indicating
the station "ST1" - "ST6" in which the station is to be stored for longer than two seconds.
press the TUNE button, >, when the
radio is operating. The radio function menu is shown on the display.
Saving a station automatically (Travelstore)
You can also save the six strongest stations in the area automatically (FM only). Note: Any stations previously saved on this level will be deleted. In order to use the Travelstore function
Press the softkey, 4, indicating "SCA".
The scanning process starts. "SCAN" is shown on the display for a short time, after which the current station name or the frequency is displayed, flashing. Scanning through the preset stations You can listen to short samples from all the stations saved on the various memory levels that can currently be received. The length of the samples can be set, in the menu, to between 5 and 30 seconds. Starting preset SCAN To start the preset scan
press the TUNE button, >, when the
radio is operating. The radio function menu is shown on the display.
Press the softkey, 4, indicating "TS".
Storing starts. or buttons, 7, in order to adjust the HICUT. "NO HICUT" means that the function is inactive, while "HICUT 3" indicates the strongest automatic reduction of the treble and the interference.
Press the
Select a program type with the
button, 7.
or
In order to save a program type, hold
down one of the softkeys, 4, indicating "ST1" to "ST6", for more than one second. The program type is saved at the chosen location. Setting the PTY language You can select the language in which program types are displayed.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. Bandwidth selection in the presence of interference (SHARX) The SHARX function provides you with the facility of eliminating interference from neighbouring stations as far as possible. Switch on the SHARX function when stations are crowded. Switching SHARX on and off
Press the MENU button, 8. Press the or button, 7, as often
as is necessary for "PTY LANG" to appear in the display. or button, 7, in order to switch between the languages "DEUTSCH", "ENGLISH" or "FRANCAIS".
Press the
Press the MENU button, 8. Press the or button, 7, as often
as is necessary for "SHARX" to appear in the display. or buttons, 7, in order to switch SHARX on or off. [. . . ] q ROCK q DISCO q JAZZ q CLASSIC q VOCAL Settings for these styles have already been programmed.
Adjust the equalizer values as described under "Action".
Switching the equalizer on and off
To switch off the equalizer, press the
DEQ button, 6. "LOW EQ" is shown on the display.
To switch off the equalizer, hold down
the DEQ button, 6 until "DEQ OFF" briefly appears. 54
EQUALIZER
butor
Press the MENU button, 8.
"MENU" appears in the display.
ton, 7.
To select the preset tone, press the
button, 7.
Press the
Press the OK button, 5. When you have completed all the settings, press the DEQ button, 6.
Press the
or buttons, 7, in order to switch the spectrometer on or off. [. . . ]