User manual BLAUPUNKT DALLAS RDM 169 US

[. . . ] 13 Displaying the radio passport data . . . . . . . 14 Visual display for anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Care of the KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 KeyCard lost/damaged . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The station is now stored. 17 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS If a number of programs in the station chain can be received, you can page through them with >> (forwards) or << (backwards), e. g. . ITALIANO Paging through the transmission chains (FM only) FRANÇAIS ENGLISH DEUTSCH Radio operation with RDS (Radio Data System) Radio operation with RDS (Radio Data System) Note: Should you store a station which has already been stored, the corresponding station key and the memory level flash briefly if a different memory level is called up. Sampling stored stations with Preset Scan You can call up stored stations at the touch of a button. FM Call up the stations directly on the selected memory level as follows: · Press the keys ST1 - ST6. To call up stations on a different memory level: · Press NEXT until the desired memory level is displayed, then select a stored station with ST1 - ST6. You can sample stored stations briefly on all frequency bands and on the selected FM memory level. Preset Scan can be started only when PTY is disabled ("PTY" is not lit on the display). If necessary, deactivate PTY on menu level 2. Proceed as follows: · Press TU and disable PTY using the PTY key. Starting Preset Scan: · Press SCA for approx. All stored stations on the frequency band which can be received are sampled briefly in turn. "SCAN" and the flashing station name/frequency appear alternately on the display. When the unit is switched on, stereo is selected automatically. When reception is poor, the unit switches smoothly to mono. If you wish to switch to mono, refer to "Programming with DSC ­ STEREO/ MONO". The state selected appears briefly on the display. Changing the sensitivity of the seek run You can change the sensitivity of the automatic seek run. If "lo" is displayed, seek only recognizes stations with good reception (low sensitivity). If "lo" is not displayed, seek also recognizes stations with poorer reception. To adjust the sensitivity, refer to "Programming with DSC ­ FM/AM Sens". Automatic bandwidth switching (SHARX) You can activate automatic bandwidth switching on the FM band by means of the SHARX function in the DSC menu. This is very useful when a number of stations are close together. Interference from strong adjacent stations is largely eliminated when SHARX ON is selected (factory default setting). If necessary, refer to "Programming with DSC ­ SHARX". 19 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH Radio operation with RDS (Radio Data System) Radio operation with RDS (Radio Data System) PTY ­ Program Type This is an RDS service which is being implemented progressively by the radio stations. The service enables FM stations to be selected according to a specific program content. [. . . ] If an external unit is connected through AUX, "ON" must be selected. ENGLISH CLK AUTO/MAN For activating/deactivating automatic hours correction. Refer also to "CLOCK time, hours correction". SCANTIME This setting defines the sampling time (5 - 30 seconds) for radio broadcasts and CD tracks. DEUTSCH Programming with DSC Programming with DSC UPDATE In CD changer mode, this function enables the names of CDs to be deleted in order to create space for new CDs. (Refer to "Deleting CD names with DSC-UPDATE". ) Selecting the reception range for your country. The frequency range in kHz within the waveband is shown in brackets for each setting. [. . . ]