User manual BLAUPUNKT DALLAS RMD 169

[. . . ] Radio / MD Dallas RMD 169 Texas DJ Operating instructions 1 2 3 4 5 13 12 11 10 9 8 7 6 19 14 15 2 18 Option / Optional / Tilval / Optie / Opcional / Opção 21 1 3 20 17 16 2 Contents Condensed instructions . . . . . . . . . . . . . . 46 Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Read the following before using the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Selecting sampled stations/terminating Preset Scan: · Press SCA or one of the rocker keys briefly. Sampling stations with Radio Scan You can sample briefly the stations which can be received on the selected frequency band. Radio Scan can be started only when PTY is deactivated ("PTY" is not lit on the display). If necessary, deactivate PTY on menu level 2 as follows: · Press TU and disable PTY using the PTY key. Switching on Scan: · Press SCA briefly. All stations on the frequency band which can be received are sampled briefly in turn. "SCAN" and the flashing station name/frequency appear alternately on the display. Selecting a sampled station/deactivating Scan: · Press SCA or one of the rocker keys briefly. If a station is not selected, Scan is switched off automatically when the seek function has passed through the complete frequency range. The station previously selected is played. Changing the sampling time (Scan) The sampling time can be selected between 5 and 30 seconds. If you wish to change the duration of the sampling time, refer to "Programming with DSC ­ SCANTIME". Changing the sensitivity of the seek run You can change the sensitivity of the automatic seek run. If "lo" is displayed, seek only recognizes stations with good reception (low sensitivity). If "lo" is not displayed, seek also recognizes stations with poorer reception. To adjust the sensitivity, refer to "Programming with DSC ­ FM/AM Sens". Toggling between stereo and mono (FM) You can toggle between stereo and mono in the DSC menu. This can be useful in areas where reception is critical. When the unit is switched on, stereo is selected automatically. 54 When reception is poor, the unit switches smoothly to mono. If you wish to switch to mono, refer to "Programming with DSC ­ STEREO/MONO". The state selected appears briefly on the display. Activating/deactivating PTY · Press PTY. When the function is activated, the last programme type selected, e. g. "SPORT", is displayed briefly. "PTY" remains on the display as long as PTY is activated. Automatic bandwidth switching (SHARX) You can activate automatic bandwidth switching on the FM band by means of the SHARX function in the DSC menu. This is very useful when a number of stations are close together. Interference from strong adjacent stations is largely eliminated when SHARX ON is selected (factory default setting). [. . . ] For example, a non-traffic programme station can be switched automatically to a traffic programme station for the duration of a traffic announcement. Following the announcement, the original non-traffic announcement station is selected again. Equalizer Sound control for adjustment of the frequency response to the acoustic conditions and personal taste. EXIT Press the key briefly to terminate or abort the adjustment process. [. . . ]