User manual BLAUPUNKT DVD-ME1

[. . . ] . 6 Preparation Before Operation Remote Control . . 8 Names and Layout of Remote Controls . . 10 Basic Operations TV/Video Selection . . 20 ­1­ SAFETY PRECAUTIONS CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN WARNING! [. . . ] s If the system of the TV/monitor is AUTO (multi-system), push SYSTEM and select AUTO. Set the "TV Display" to "16:9 WIDE" in the function setting column. Set the "TV Display to "4:3/PS" or "4:3/LB" in the function setting column. Connect the output terminal of the AC adaptor to DC IN jack of this unit. Connect the other plug to AC power source. If you want to enjoy the music by yourself, please connect the headphone (not supplied) to the jack on the front panel. Video In Audio In-R Audio In-L Connect to an Ordinary Home Amplifier Turn off all the equipment before connections. TV/Monitor Video In External Remote Sensor REMOTE IN VIDEO OUT R L AUDIO OUT DC 12V 1. 5A AC Adaptor (to AC) Audio In-L Audio In-R There is no sound output from the output terminal when a DTS disc is played. ­ 10 ­ BASIC OPERATIONS TV/Video Selection Press POWER on the TV and audio system. Press "TV/VIDEO" on the TV/monitor, select VIDEO mode. Select the correct audio input for your system. amplifier is different from another, please refer to the manual of the amplifier. (e. g. , connect the audio output of the DVD player to the DVD audio input of an amplifier. ) s Each TV/Video DVD/LD Note: this step can be cancelled if you are utilizing the auxiliary input of a Blaupunkt receiver. Play Discs DVD CD 1. Press POWER to turn on the unit. Front Panel 2. Press to open the disc tray and load a disc with the label side up. Open/Close 3. The unit begins to read the disc. Front Panel 4. Press (PLAY) to play the disc. AFTER STEP 4 IS FINISHED: s PLAY DVD The TV screen shows DVD menu or title menu. s PLAY CD Press (PLAY), the unit plays the disc according to the track numbers. 5. You have to push this button twice to stop playback of a DVD disc. DVD System Settings According to the system of the TV/monitor, set the system of the unit to make it match the TV/monitor. System 1. If the system of the TV/monitor is PAL: Press SYSTEM , select PAL. If the system of the TV/monitor is NTSC: Press SYSTEM , select NTSC. The screen shows: NTSC Pause DVD CD Pause WHEN PLAYING PICTURES If the pictures of DVD are played, press to make playback pause. Each time you press , the picture advances one frame. STEP WHEN PLAYING MUSIC CD Press to make playback pause. Press (PLAY) to resume playback. ­ 11 ­ BASIC OPERATIONS OSD (On-Screen Display) When the OSD is pressed, the TV/monitor screen shows the operation functions and information about the disc. DVD CD Press OSD to select: OSD OSD OFF Volume Control s s DVD CD Press VOLUME on the TV/monitor or amplifier to adjust the volume. [. . . ] This warranty is limited to the original consumer purchaser and is not transferable. Repaired and replacement car audio and video products shall assume the identity of the original for purpose of this warranty and this warranty shall not be extended with respect to such products. To obtain performance of this warranty, contact the nearest Blaupunkt authorized repair facility or our nearest office. A dated purchase receipt or other proof that the product is within the warranty period will be required in order to honor your claim. [. . . ]