User manual BLAUPUNKT ESSEN MP36

[. . . ] Radio CD MP3 Essen MP36 7 646 150 510 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 11 10 9 8 7 2 CONTROLS DEUTSCH 1 2 Button to switch the device on/ off and operate the volume mute function. SRC button Short press: Switch sources between CD/MP3, CD changer (if connected) and AUX. Long press: Briefly display the clock time. Volume control CD compartment TRAF RDS button Short press: Switch traffic-information standby on/off. [. . . ] If interference occurs, the interference level is cut automatically. Switching HICUT on/off Press the MENU button 8. Press the or button 7 repeatedly until "HICUT" appears in the display. Press the or button 7 to adjust the HICUT setting. "HICUT 0" means that the interference level will not be cut automatically. "HICUT 1" means that it will be cut automatically. Press the MENU button 8. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Optimising radio reception Press the MENU button 8. Press the or button 7 repeatedly until "PTY LANG" appears in the display. Set your preferred language using the buttons 7. When you have finished adjusting the setting, press the MENU button 8 twice. Selecting a programme type and starting seek tuning Press the or button 7. The current programme type appears in the display. Configuring the display In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select "FREQUENCY" to display the station name / frequency or select "CLOCK" to display the waveband together with the memory bank / memory location and the clock time. Press the or button 7 repeatedly until "TUN DISP" appears in the display. Press the or button 7 to switch between "CLOCK" and "FREQUENCY". 39 If you want to select another programme type, you can do so by pressing the or button 7 whilst this display is visible. The selected programme type appears briefly in the display. The radio will then tune into the next station it finds that matches your selected programme type. Press the TRAFFIC INFORMATION Traffic information Your device is equipped with an RDSEON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme you were listening to before. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. G Setting the volume for traffic announcements Press the MENU button 8. Press the or button 7 repeatedly until "TA VOLUME" appears in the display. When you have finished adjusting the setting, Switching traffic information priority on/off Briefly press the TRAF button Adjust the volume using the 6. Traffic announcement priority is active when the traffic-jam symbol lights up in the display. press the MENU button 8 twice. Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. [. . . ] Adjusting the X-BASS boost press the AUDIO button 9. "BASS" appears in the display. Press the button 7 repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears in the display. or button 7 to select one of the presets or select "EQ OFF" to switch off the equalizer. If you select one of the presets, it is shown continuously in the display. When you have finished adjusting the setting, Press the Press the AUDIO button 9. "BASS" appears in the display. Press the button 7 repeatedly until "XBASS" appears in the display together with the current setting. press the AUDIO button 9. or button 7 repeatedly until the setting that you want appears in the display. When you have finished adjusting the setting, Press the press the AUDIO button 9. 52 LEVEL DISPLAY Configuring the level display EXTERNAL AUDIO SOURCES Instead of connecting a CD changer, you can connect another audio source equipped with a line output. [. . . ]