User manual BLAUPUNKT FRANKFURT RCM82

[. . . ] Note: By means of the support included in delivery you can mount the set in cars with a DIN car radio cutout of 182 x 53 mm, an installation depth of 165 mm and an instrument panel thickness around the fixing clips of 1 - 20 mm, see fig. For cars with other cutout dimensions Blaupunkt delivers car-specific installation kits for common car types for 50/52 mm sets. [. . . ] Prepare the car radio DIN cutout (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cutout and check how many of the fixing strips of the car radio support may be bent. note: Try to bend as many fixing strips as possible. Insert the support into the cutout and bend the appropriate fixing strips with a screwdriver, see fig. Connect the positive cable together with distributor to pin 30 (constant power) or pin 15 (positive line connected via ignition) of the fuse holder behind the fuse. Connect the permanent plus terminal together with the cable and cable clamp to a fuse-protected positive line (e. When connecting a fully automatic motor antenna, use the cable clamp to fasten the control cable of the motor antenna to the control cable. lighting connection (Illumination) Lighting connection for vehicles with adjustable dashboard lighting (pluscontrolled). Telephone mute (Low) If you have connected a car telephone, your car radio will be mutet during telephone calls. Telephone mute is not possible if a CD player is installed in your car. [. . . ] 5 mm ) to the battery (do not route the cable near the cable harnesses). Connect the fuse holder to protect the positive cable and connect it to the positive pole of the battery (if necessary, drill a hole into the fire wall and use cable ducts). [. . . ]