User manual BLAUPUNKT FREIBURG C31

[. . . ] Radio / Cassette Canberra C31 Freiburg C31 Las Vegas DJ31 San Diego DJ31 Operating instructions Bitte aufklappen Open here Ouvrir s. v. p. Öppna Por favor, abrir Favor abrir 2 1 2 16 15 3 14 4 5 6 13 7 12 8 11 9 10 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL OPERATING ELEMENTS 1 2 Button, to unlock the removable control panel (release panel) BAND button (Band), to switch to radio mode, to select the FM memory levels and the MW and LW frequency ranges (MW and LW are not available on the Freiburg C31 and Las Vegas DJ31) TS, to start the Travelstore function FMT button (Freiburg C31 and Las Vegas DJ31), to select the FM memory levels, to switch to radio mode, to start the Travelstore function. RDS button, to switch the RDS function on/off (Radio Data System). SCAN button, to start the scan function. [. . . ] There are three preset memory levels for the FM range and one for each of the MW and LW ranges (only FM1, FM2 and FMT in the case of the Freiburg C31 and Las Vegas DJ31 units). ESPAÑOL SVENSKA Selecting the frequency range / memory NEDERLANDS RDS functions (AF, REG) ITALIANO press the BAND (TS) button 2 or FRANÇAIS ENGLISH DEUTSCH Radio mode Switching REG on/off RADIO MODE Five stations can be stored on each memory level. When using this feature, you will only be able to switch to stations that you have received once already. To do so, use the scan or Travelstore function. Briefly press the BAND (TS) button 2 or the FMT button 2 to switch between the memory levels and frequency ranges. Setting the sensitivity of the station search mode You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception. Keep pressing the or button ; until "SENS HI" or "SENS LO" appears in the display. The display shows the currently set value for sensitivity. "SENS HI6" means that the tuner is highly sensitive. "SENS LO1" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Set the required sensitivity using the and buttons ;. When you have finished making your changes, Tuning into a station There are various ways of tuning into a station. Automatic seek tuning Press the or button ;. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Press the or button ;. Note: q You can only tune into stations manually if the RDS function is deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". press the MENU button <. Storing stations Storing stations manually Press the or button ; to move to the next station on the broadcasting network. Select the required FM1 / FM2 / FMT memory or one of the MW / LW frequency ranges (only FM in the case of the Freiburg C31 and Las Vegas DJ31 units). Tune into the required station. q Note: The RDS function must be activated before you can use this feature. 34 RADIO MODE 5 = for longer than two seconds to store the station to that button. Press the SCAN button 4. Scanning begins. "SCAN" briefly appears in the display followed by a flashing display of the current station name or frequency. Stopping SCAN and continuing listening to a station Note: q Stations that were previously stored in this memory are deleted in the process. Keep the BAND (TS) button 2 or FMT button 2 pressed for longer than two seconds. "T-STORE" appears in the display. After the process is completed, the station stored in FMT memory location 1 will be played. Scanning is stopped and the station that was tuned into last will remain active. Setting the scantime Press the MENU button <. Keep pressing the or button ; until "SCANTIME" appears in the display. Set the required scantime using the and buttons ;. When you have finished making your changes, Listening to preset stations Select the memory or the frequency range. [. . . ] When you have finished making your changes, press the AUDIO button :. Setting the front/back volume distribution (fader) To adjust the front/back volume distribution (fader), press the AUDIO button :. Adjusting the treble settings To adjust the treble, press the AUDIO button :. "BASS" appears in the display. press the AUDIO button :. "BASS" appears in the display. Keep pressing the Press the button ; until "TREB" appears in the display. Keep pressing the Press the button ; until "FADER" appears in the display. or button ; to adjust the treble. When you have finished making your changes, or button ; to adjust the fader (front/back). [. . . ]