User manual BLAUPUNKT GTB 1200 SC

[. . . ] ­ When you drill holes, ensure that you do not damage any vehicle components. Use cable glands for holes with sharp edges. ­ Leave ample clearance between the cables and other harnesses. ­ An incorrect installation can result in malfunctions of the electronic vehicle systems or your car sound system. [. . . ] If you are happy with the sound then you are already finished with the setup process. If male voices seem to billow out or the low bass is too weak, you should turn the crossover control slightly towards minimum and then resume making your adjustments as described in point 2 onwards. If the bass sounds low but dirty and booming or the male voices sound too weak, you should turn the crossover control slightly towards maximum. Furthermore, you should set the phase control (if present) so that the upper bass sounds as powerful as possible. Next, resume making your adjustments as described in point 2 onwards. To dispose of the product, please use the available waste return and collection systems. Lyssna nu till hur djupa mansröster förhåller sig till högbasen och hur denna förhåller sig till djupbasen. Rulai acum o muzic pe care o cunoatei bine i care conine secvene cu bai (de ex. Please read these operating instructions before using the equipment for the first time. Bass component, and male voices should neither sound too weak nor should they billow out. If you are happy with the sound then you are already finished with the setup process. If male voices seem to billow out or the low bass is too weak, you should turn the crossover control slightly towards minimum and then resume making your adjustments as described in point 2 onwards. If the bass sounds low but dirty and booming or the male voices sound too weak, you should turn the crossover control slightly towards maximum. Furthermore, you should set the phase control (if present) so that the upper bass sounds as powerful as possible. Next, resume making your adjustments as described in point 2 onwards. Please observe the following safety notes during the installation and connection. ­ Disconnect the negative terminal of the battery before carrying out installation and connection work. ­ Observe the vehicle manufacturer's safety instructions (regarding airbags, alarm systems, trip computers, vehicle immobilisers). ­ Prior to drilling the mounting holes, make sure that no cables and parts of the vehicle will be damaged. Use cable glands for holes with sharp edges. [. . . ] First set the volume control to minimum and the crossover control to its middle position. Now play some music on your car sound system that you are very familiar with and that contains some low bass (e. Now slowly increase the volume of the subwoofer until you feel that the sound of the music is well balanced, i. The bass is neither too weak nor overpowering. [. . . ]