User manual BLAUPUNKT HAMBURG CD 70 INSTALLATION INSTRUCTION

[. . . ] 27 Installation/connection . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Optical indication of theft protection . . 27 KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Replacing a KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To switch between MW and LW: · press M·L. ENGLISH DEUTSCH Radio operation with RDS (Radio Data System) Manual seek tuning << >> Prerequisite: AF is switched off!· Press << or >> to change the frequency in small steps in upwards/ downwards direction. If you hold down the right or left part of the rocker switch, then the car radio will move through the stations quickly. The unit will automatically switch to mono playback under poor reception conditions. Changing the memory bank (FM) You can shift between the memory banks I, II, and "T" to store and to recall preset stations. The selected memory bank is indicated in the display. · Press FMT until the desired memory bank lights up in the display (press repeatedly if necessary). Note: Should you tune into a station which has already been stored, the corresponding preset button and the memory bank will start flashing in the display for a short while, if you have selected another memory bank. Storing the strongest stations automatically with Travelstore You can use the Travelstore memory bank to automatically store the six strongest FM stations sorted on the preset buttons according to their signal strength. This feature is especially useful when travelling, because it will always give you the most powerful stations at a finger tip as you pass through the various reception areas. · Press FMT for approximately 2 sec. The radio will search for the six most powerful FM stations and store them on the "T" memory bank (Travelstore). When this process has been completed, the radio will tune in the strongest station. FM stations can also be stored manually on the Travelstore memory bank (see "Storing stations"). Adjusting the seek tuning sensitivity The set allows you to modify the seek tuning sensitivity. If "lo" is indicated, the radio will only pick up strong stations (low sensitivity). Choose the desired SCANTIME in the DSC menu. All of the stations in that waveband will be scanned one after another. Depending on which memory bank has been activated for FM, all of the stations in either I, II or the Travelstore level will be scanned. If a preset is not in use, it is skipped. To stop the scan: · Press the PS button once again. The radio will continue to play the currently scanned station. · · press DSC, select item "ST NAME" with rocker switch / and 31 PORTUGUES Using the ST NAME item of the DSC menu you can enter a name with a maximum of 8 digits for all stored frequencies of memory banks I and II. Most of the FM stations are RDS stations, the names of which will be shown in the display. ESPAGÑOL Station naming · press -dB. · Now select a character with rocker switch / . You have the choice between the capital letters (A-Z), special characters and the numbers (0-9). · Use the rocker switch << >> to move to the next position and select a character. In this way, up to 8 characters can be entered. SVENSKA NEDERLAND ITALIANO To start your entry: · Choose a station, FRANÇAIS The displayed RDS name has priority over all entries specified by the user. [. . . ] To enter the name: First, switch off the priority for traffic announcements. Otherwise the entry will be deleted if an announcement is broadcast. Press the TA button to switch the "TA" display off. Be sure that at least one CD is inserted in the CD magazine. [. . . ]