User manual BLAUPUNKT HAMBURG 420 BT

[. . . ] Com Operating and installation instructions Controls 1 2 3 4 5 6 7 8 9 17 16 15 14 13 12 11 10 1 button Unlock the detachable control panel Short press: Call up/close menu Long press: Start scan function : USB port ; Front AUX-IN socket < = 2 MENU button button (only Hamburg 420 BT) Ending/rejecting a phone call button (Hamburg 420 BT only) Short press: Answering a call, speed dial Long press: Open the phone book of the cell phone or activate voice dialing 3 On/Off button Short press: Switch on car sound system In operation: Mute car sound system (Mute) Long press: Switch off car sound system 4 Volume control 5 CD tray 6 Display 7 Rotary control > Keys 1 - 5 ?Infrared receiver @ SRC button Select memory bank or audio source A DIS button In the menu: Change menu level, select menu item, change setting Radio mode: Set frequency, start station/PTY seek tuning CD/MP3/WMA/iPod mode: Track selection, fast forward/reverse Browse mode in MP3/WMA/iPod mode: ID3 category (iPod only), select folder and track 8 Short press: Switch display Long press: Switch display brightness B SD card slot Access only with detached control panel button (Eject) Eject a CD 18 9 Microphone (Hamburg 420 BT only) 2 Contents Safety notes . 33 3 Safety notes Safety notes The car sound system was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions. [. . . ] You can cancel the voice recognition by pressing the button <. Please note that the duration of the voice recognition is limited and depending on the respective cell phone. You can also activate the voice recognition via speed dial (see the section "Speed dial for voice dial" in this chapter). 18 Bluetooth® Storing a phone number in the car sound system You can store phone numbers in the car sound system and make calls using the speed dial (see the following section). A phone number is stored for the currently connected telephone and is available only for this telephone. The car sound system can store up to five numbers for up to five paired devices. U Enter the phone number as described in the section "Making a call". U Press the desired memory button 1 - 5 > for approx. - or u Press the rotary control 7 for approx. 2 seconds to enter a name for the entry. You can now enter a name with up to 15 characters: u Turn the rotary control 7 to select a character for the respective position. U Press the rotary control 7 to go to the next position. Note: To return to the previous position in the entry menu, turn the rotary control 7 until the "<<<" option is selected, and press the rotary control 7. U Press the desired memory button 1 - 5 > for approx. The display briefly shows "NUMBER SAVED". Afterwards, you are returned to the Bluetooth® menu and the "DIAL NEW NUMBER" menu item. notes: · A number previously stored on the memory button is replaced. If a telephone is unpaired, the numbers stored for this telephone are automatically deleted. Speed dial for any phone number or for the number dialed last or a stored number With speed dial, you can make a call without first having to select the corresponding function in the Bluetooth® menu. to call the number dialed last , button =. U press the The display shows the number dialed last. Note: If no cell phone is currently connected, the Bluetooth® menu is opened. [. . . ] The warranty terms can be called up from www. 9 MHz AM (MW): 530 ­ 1, 710 kHz FM frequency response: 30 ­ 15, 000 Hz CD Frequency range: Pre-amp out 4 channels: Input sensitivity Front AUX-IN: 20 ­ 20, 000 Hz 2V 300 mV / 10 k Service In some countries, Blaupunkt offers a repair and pick-up service. Information about the availability of this service in your country can be found at www. If you want to take advantage of this service, you may request a pick-up service for your car sound system via the Internet. [. . . ]