User manual BLAUPUNKT HEIDELBERG CD50

[. . . ] Radio / CD Heidelberg CD50 Operating instructions 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH OPERATING ELEMENTS 1 2 3 4 button to unlock release panel Volume control ON button, switches the unit on/off, mute RDS button, switches the RDS function on/off Selects display for variable text FM button, selects the FM waveband and the FM memory bank TS, starts the TravelStore function Display button, displays the time DIS, changes display contents MENU button, accesses the menu for basic settings button, opens the flip release panel Cursor button block OK button, confirms menu selections and starts the SCAN function DEQ button, adjusts the equalizer AUD button, adjusts bass, treble, balance and fader LD, switches the Loudness function on/off 1 to 6 station buttons AM button, selects the AM waveband CD·C button, switches sound source between radio, CD player and CD changer (if connected) 5 6 7 8 9 : ; < = > ?@ 4 CONTENTS Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press : repeatedly until "SHARX" appears in the display. "SHARX OFF" means no bandwidth switching, "SHARX ON" means automatic bandwidth switching. Press MENU 8. Press : repeatedly until "FM TUNER" appears in the display. Press Press : to select the country. Once you have completed the setting, press MENU 8 or OK ;. Press MENU 8 or OK ;. Selecting the display of variable text A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names. These "variable texts" will appear in the display. It is possible to adjust your radio so that these "variable texts" do not appear. Press and hold down RDS 4 until "NAME FIX" appears in the display. To have the "variable texts" displayed again, press and hold down RDS 4 until "NAME VAR" appears in the display. 13 CD PLAYER OPERATION CD player operation The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs. Selecting tracks Press a key on the cursor block : to select the next or the previous track. Press or : once to restart the same track. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Starting CD player operation q If there is no CD in the player, 9. The flip release panel will open. press Playing tracks in random order (MIX) Press 5 MIX >. "MIX CD" will appear briefly in the display, the MIX symbol will light up in the display. The next track played will be selected at random. Stopping the MIX function Insert a CD into the player with the label facing up until you feel slight resistance. The CD will be pulled into the player automatically. Do not attempt to assist or prevent this process. Press 5 MIX > again. "MIX OFF" will appear briefly in the display and the MIX symbol will no longer light up. Press the operating panel closed gently until you feel it click into place. q If there already is a CD inserted into the player, Scanning tracks (SCAN) You can scan all of the tracks on the CD. Press OK ; for longer than two seconds. Scanning will begin with the next track. Note: It is possible to adjust the scan time. For more information, read the section on "Adjusting the scan time" in the chapter on "Radio Operation". press CD·C @ repeatedly until "CD" appears in the display. Playback will resume at the point where it was interrupted. 14 CD PLAYER OPERATION ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Stopping the SCAN function, continue listening to the current track To stop the SCAN function, press OK ;. The track currently scanned will continue playing. press / DIS 7 for longer than two seconds once or repeatedly until the desired display becomes visible. Naming CDs To help you to identify your CDs more easily, the car audio system allows you to individually name up to 30 CDs. [. . . ] Respecter les consignes de sécurité du constructeur automobile !- Veiller à n'endommager aucune pièce du véhicule en perçant des trous. 92 Durante el montaje y la conexión es imprescindible observar las siguientes normas de seguridad. - Desemborne el polo negativo de la batería. [. . . ]