User manual BLAUPUNKT HEIDELBERG CD50 U

[. . . ] 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information . . . . . . . . . . . . . . [. . . ] tion, press MENU 8 or OK ;. RADIO OPERATION Radio operation Swit ching t o the radio mode If you are currently using the CD player or CD changer, Once you have made your selecAdjusting t he volume of t he beep For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e. g. if you want to store a radio station on a station preset. You can adjust the volume level of this beep. press CD·C @ repeatedly until "RADIO" appears in the display. RDS function This car audio system has been equipped with an RDS radio receiver. Many FM radio stations now transmit a signal which contains such other information as the station name along with their regular programming. As soon as the radio station name is detected, it will appear in the display. The RDS function can be switched on or off. Switching the RDS function on/off Press MENU 8. Press : repeatedly until "BEEP" appears in the display. Press : to adjust the volume. "0" means the beep volume is off, "9" means the beep volume is adjusted to the maximum volume. tings, press MENU 8 or OK ;. To take advantage of the RDS function, press RDS 4. When the RDS function has been activated, the RDS symbol will light up in the display. Once you have adjusted the set- Select ing t he waveband/ memory bank The car audio system is able to receive FM and AM radio programs. There are three memory banks for the FM waveband and one memory bank for the AM waveband. These "variable texts" will appear in the display. It is possible to adjust your radio so that these "variable texts" do not appear. Press and hold down RDS 4 until "NAME FIX" appears in the display. To have the "variable texts" displayed again, press and hold down RDS 4 until "NAME VAR" appears in the display. 13 CD PLAYER OPERATION CD player operation The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs. Select ing t racks Press a key on the cursor block : to select the next or the previous track. or : once to restart the Press same track. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Starting CD player operat ion If there is no CD in the player, 9. press Playing t racks in random order (MIX) Press 5 MIX >. "MIX CD" will appear briefly in the display, the MIX symbol will light up in the display. The next track played will be selected at random. Stopping the MIX function The flip release panel will open. Insert a CD into the player with the label facing up until you feel slight resistance. The CD will be pulled into the player automatically. Do not attempt to assist or prevent this process. Press 5 MIX > again. "MIX OFF" will appear briefly in the display and the MIX symbol will no longer light up. Press the operating panel closed gently until you feel it click into place. If there already is a CD inserted into the player, Scanning t racks (SCAN) You can scan all of the tracks on the CD. Press OK ; for longer than two seconds. Scanning will begin with the next track. [. . . ] The following filters are available: SUB LOW EQ 32 to 50 Hz LOW EQ 63 to 250 Hz MID EQ 315 to 1250 Hz MID/HIGH EQ 1600 to 6300 Hz HIGH EQ 8000 to 12500 Hz These filters can be adjusted without the use of measuring equipment. As a result, it is possible to significantly influence the in-vehicle acoustics. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Press AUD / LD = for approx. LD will light up in the display to indicate that Loudness is active. Adjusting Loudness int ensit y The Loudness boost can be set in stages from one to six. Press MENU 8. "MENU" will appear in the display. Press : repeatedly until "LOUDNESS" appears in the display. Press or : to alter the Loudness setting. Notes on making equalizer settings We recommend that you use a CD you are familiar with to make the settings. Before you set the equaliser, set bass, treble, balance and fader to "0" and deactivate the Loudness function. [. . . ]