User manual BLAUPUNKT HONOLULU CD50 BLUE U

[. . . ] 6 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information . . . . . . . . . . . . . . 6 Removable front panel . . . . . . . . . . . . . [. . . ] You can reduce the volume of the car audio system immediately (mute). ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Volume control Mute Press 3 briefly. "MUTE" will appear in the display. Selecting the mute level It is possible to select the mute level. To increase the volume, turn the volume control knob 2 to the right. To decrease the volume, turn the volume control knob 2 to the left. Adjusting the power-on volume It is possible to adjust the volume at which the car audio system switches on. Press MENU 8. Press : repeatedly until "MUTE LEVEL" appears in the display. Press MENU 8. Press : repeatedly until "ON VOLUME" appears in the display. Press level. : to select the mute Once you have made your selection, press MENU 8 or OK ;. Press : to adjust the vol- ume. If you adjust this setting to "0", the car audio system will switch on at the volume used before it was switched off. Warning of serious injury If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on. If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears! Mute during telephone operation If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. The car audio system will be muted to the mute level selected. Once you have selected the desired settings, press MENU 8 or OK ;. 9 VOLUME CONTROL Adjusting the volume of the beep For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e. g. Press : repeatedly until "FM TUNER" appears in the display. Press region. or : to set the country/ Press OK ;. SCAN will end and the last station scanned will continue playing. Once you have made your selection, press MENU 8 or OK ;. Adjusting the scan time Press MENU 8. q If there already is a CD inserted into the player, Scanning tracks (SCAN) You can scan all of the tracks on the CD. Press OK ; for longer than two seconds. Scanning will begin with the next track. Note: It is possible to adjust the scan time. For more information, read the section on "Adjusting the scan time" in the chapter on "Radio Operation". 13 press CD·C @ repeatedly until "CD" appears in the display. Playback will resume at the point where it was interrupted. CD PLAYER OPERATION Stopping the SCAN function, continue listening to the current track CD CHANGER OPERATION CD changer operation Note: For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the CD changer. To stop the SCAN function, press OK ;. The track currently scanned will continue playing. Repeating individual tracks (REPEAT) To repeat the track currently playing, press 4 RPT >. "REPEAT TRCK" will appear briefly in the display, the RPT symbol will light up in the display. The track will continue to repeat until RPT is deactivated. Stopping the REPEAT function Starting CD changer operation Press CD·C @ repeatedly until "CHANGER" appears in the display. [. . . ] - Do not connect the vehicle's plug connectors to the radio!- You can obtain the adapter cable required for your vehicle type from any BLAUPUNKT dealer. E Normas de seguridad F Consignes de sécurité Respecter les consignes de sécurité suivantes pendant la durée du montage et du branchement. - Débrancher le pôle (-) de la batterie !Respecter les consignes de sécurité du constructeur automobile ! [. . . ]