User manual BLAUPUNKT IF CDCA08 IDCA09 VW AUDI

[. . . ] 64000 files and directories, up to 16 directory levels - 40° C . . . 85° C 5V / 0, 5 A (1, 0 A short term / kurzzeitig) +12 . . . 28 V 1. 1 x 3. 2 x 4. 8 (without cables) 28 x 81 x 121 (ohne Kabel) 300 g For all Blaupunkt Aftermarket radios as from 2002 supporting CDC. Für alle Blaupunkt-Autoradios ab 2002, die CD Changer Control unterstützen. 4 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the Settings menu, you can select different views and configurations for this purpose. If ID3 tags to be displayed should not be filled out in MP3 files (e. g. no track), the note "No Track" is displayed. During the WAV playback, the file name (display = 1 line) or file name in line 1 and directory name in line 2 (display = 2 lines) is automatically shown. The following scan rates are supported: 8 kHz, 11. 025 kHz, 12 kHz, 16 kHz, 22. 05 kHz, 24 kHz, 44. 1 kHz, 48 kHz The control of the playback is identical to that of MP3 files. In TXT or MD mode, ID3 text display in radio display. Setting via config. txt, see Loading a configuration file. 31 Audio streaming via BT Activate the audio streaming on your cell phone or BT streaming transmitter. If the PIN of your BT streaming transmitter is permanently set to "0000", you can also adjust the interface to this PIN, see the Settings menu. During the audio streaming, the OLED display shows "STREAM". For some BT streaming transmitters with remote control option (BT AVRCP, Audio Video Remote Control Profile), it is possible to jump to the previous/next track by turning the rotary button to the left or right or pressing the left/right radio button. Browsing (OLED) During the MP3 or WAV playback from the USB medium, press the rotary button to reach the Browsing mode. Briefly pressing on the red phone button calls up the previous/higher-level menu item. Notes: · To avoid possible setting conflicts, you should delete or rename the config. txt file from your Blaupunkt directory when using an OLED display. · The following overview shows which settings you can perform in your interface. The basic factory settings are marked in grey. Which settings are active? In the Settings menu under Settings -> Info -> BT-USB-IF -> Config, the OLED display indicates which configuration settings are currently active. This information can also be found in the id. txt file, see the section Instructions for reading out technical data. 32 Operation with PTT Adjust the desired configuration by loading a config. txt file. See the section Instructions for configuration changes The following table shows the displayed configurations in square brackets [. . . ]. 33 Settings [Config display] Bluetooth Delete pairing All Function Settings of various Bluetooth functions Deleting the pairings between interface and Bluetooth devices All pairings saved in the interface are deleted. Start pairing On Opens the time window in which interface and Bluetooth devices can be paired. PIN 1234 0000 Standard setting "1234" For streaming devices with fixed setting of the PIN to "0000" Bluetooth compatibility mode Basic setting for all Bluetooth cell phones that do not have the following specific feature. This setting should be activated if your cell phone does not request the PIN for the "Blaupunkt IF" after the pairing during the Bluetooth connection attempt. For example, this applies to Nokia 6210, Motorola V300 Which phone book should be loaded from the cell phone?All available phone books (SIM card, inside cell phone) are loaded into the interface (max. total entries: 200) Only the phone book of the SIM card is being loaded (max. total entries: 200) Only the internal phone book of the cell phone is being loaded (max. [. . . ] For this, proceed as follows: · Copy the file "config_universal. txt" from the unpacked download archive into the Blaupunkt directory of your USB data medium. · Rename the file in "config. txt". · Open the "config. txt" file with a text editor, e. g. · (De) activate the desired parameters. [. . . ]