User manual BLAUPUNKT LBECK C30

[. . . ] 21 Traffic information in cassette mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Entering the code . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Code LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Audio settings . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 19 Installation instructions . . . . . . . . . . 84 Tuning into a station . . . . . . . . . . . . . . . . . . . . . . . 20 Automatic station search mode . . . . . . . . . 20 Sensitivity of the station search mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Storing stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Storing stations manually . . . . . . . . . . . . . . . . . . 20 Storing stations automatically (Travelstore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Listening to preset stations . . . . . . . . . . . . 21 Switching traffic information priority on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Setting the traffic announcement volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 15 IMPORTANT INFORMATION Important information Before using your car radio, please read these instructions carefully and familiarise yourself with the unit. Switching on/off using the vehicle ignition. If the unit is correctly connected to the vehicle's ignition, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off. VOLUME ADJUSTMENT Volume adjustment The system volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the system volume, turn the volume control 2 to the right. To decrease the system volume, turn the volume control 2 to the left. To do so, press button 3 until the unit turns on. Note: To protect the vehicle battery, the unit will switch off automatically after one hour. Switching on/off using button 3. Setting the power-on volume You can set the unit's default power-on volume. Keep pressing the MENU button ; until "ON VOL" appears in the display. Set the power-on volume using the and buttons :. If you set the power-on volume to 0: every time you turn the unit on, the power-on volume will be the same as the volume level that was set before the unit was last switched off. If the power-on volume is set to maximum, the volume level can be very high when the unit is switched on. If the volume was set to maximum before the unit was switched off and the power-on volume is set to 0, the volume level can be very high when the unit is switched on again. To switch the unit on press button 3. To switch the unit off press button 3 for longer than two seconds. Press the MENU button ;. Mute setting This feature allows you to instantaneously reduce the system volume (mute). Press button 3. 18 RADIO MODE This unit is equipped with an RDS radio receiver. Nearly all receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name. The station name appears in the display as soon as it is received. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Radio mode Press the or button : until "REG ON" or "REG OFF" appears in the display. Press the MENU button ; until the radio display appears in the display. [. . . ] After the process is completed, you will start hearing the station that is stored in FMT memory location 1. Keep pressing the MENU button ; until "SENS" appears in the display. The display shows the currently set value for sensitivity. "SENS HI" means that the tuner is highly sensitive. "SENS LO" means it has a low sensitivity setting. [. . . ]