User manual BLAUPUNKT LEXINGTON C32

[. . . ] Louis C32 Operating instructions http://www. blaupunkt. com Open here Ouvrir s. v. p. Por favor, abrir Favor abrir 2 1 14 2 13 3 4 5 12 6 7 8 11 10 9 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 5 6 7 8 9 : ; button to release the control panel Button to switch the unit on/off Volume control Cassette eject Cassette compartment FR button, fast tape winding FF button, fast tape winding Arrow buttons MENU button, to open the basic settings menu SOURCE button, to select the CC, radio and CD changer sources AUDIO button, to adjust the bass, treble, balance and fader settings (Balance und Fader) Short press: EQ button, to select the sound presets Long press: X-BASS, X-Bass function Keys 1 - 6 Short press: BAND button, to select the FM memory bank and the AM waveband, source selection to radio mode Long press: TS, to start the Travelstore function. button, to display the time < = > 4 CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The unit can only be switched on when the ignition is turned on. To switch the unit off, press button 2 for longer than two seconds. The unit switches off. press the MENU button 8 twice. Instantaneously reducing the volume (mute) You can instantaneously reduce the volume (mute) to a level preset by you. Briefly press button 2. "MUTE" appears in the display. 8 ADJUSTING THE VOLUME Setting the mute level You can set the unit's mute volume level. RADIO MODE Switching to radio mode If you are in CC or CD changer mode (CD changer only with the Lexington C32), ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Radio mode Press the MENU button 8. Keep pressing the or button 8 until "MUTE LVL" appears in the display. Set the mute level using the keep pressing the SOURCE 9 button until the radio mode appears in the display together with the memory bank and frequency. and buttons 8. When you have finished making your changes, press the MENU button 8 twice. Mute while telephoning If your unit is connected to a mobile telephone, the car radio's volume will be muted as soon as you "pick up" the telephone. "TEL CALL" flashes in the display. This requires to the mobile telephone be connected to the car radio as described in the installation instructions. The volume will be reduced to the configured mute volume level. Selecting the frequency band / memory bank This unit can receive programs broadcast over the FM and AM frequency band. There are three preset memory bank for the FM range and one for the AM range. Six stations can be stored on each memory bank. Selecting the FM memory bank To switch between the FM memory bank FM1, FM2 and FMT, press the BAND/TS button =. Selecting the AM waveband To select the AM waveband, keep pressing the BAND/TS button = until AM appears in the display. 9 RADIO MODE Tuning into a station There are various ways of tuning to a station. Automatic seek tuning Storing station presets Storing stations manually Select the required memory bank (FM1, FM2 or FMT) or the AM waveband. Press the or button 8. The unit tunes to the next receivable station. Tune into the station. Press one of the station buttons 1-6 < for longer than one second to store the station in that preset memory. Setting the sensitivity of station seek tuning You can choose whether to tune only to strong reception stations or to also tune to those with a weak reception. Press the MENU button 8. Keep pressing the or button 8 until "SENS HI" or "SENS LO" appears in the display "SENS HI" means that the tuner is set high to sensitivity. "SENS LO" means it is set to the low sensitivity setting. If "SENS LO" is selected, "LOC" lights up in the display. Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency band. Note: Any stations that were previously stored on this memory bank are deleted in the process. Set the required sensitivity using the and buttons 8. When you have finished making your changes, press the MENU button 8. Tuning into stations manually You can also tune into stations manually. Press and hold the BAND/TS button = until seek tuning begins. [. . . ] Pendant le montage et le branchement, observez les consignes de sécurité suivantes : ­ Débrancher le pôle (-) de la batterie. ­ Observer ce faisant les indications de sécurité du constructeur automobile. ­ Veiller à ne pas endommager les pièces du véhicule en perçant des trous. ­ La section transversale du câble (+) et (-) ne doit pas être inférieure à 1, 5 mm2. 60 E Especificaciones sobre la instalación y conexión ­ En caso de realizarse una instalación o un mantenimiento inadecuado, éstos pueden ocasionar fallos en las funciones de los sistemas eléctricos del vehículo. [. . . ]