User manual BLAUPUNKT LONDON RDM 104

[. . . ] Operating instructions London RDM 104 20 19 18 17 16 15 14 1 13 2 3 4 5 6 7 8 9 10 11 12 RADIO 7 CD 7 Table of contents Short description . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Important information . . . . . . . . . . . . . . . . . . 30 What you really have to read . . . . . . . . . . . . . . . . 30 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Depending on which memory level has been activated for FM, all of the stations in either I, II or the Travelstore T level will be scanned. Unassigned station buttons will be skipped over. If you would like to listen to the station currently being scanned, · then just press the PS/MIX button once more. Scanning stations with Radio Scan You can scan all of the stations in your reception range on any one of the frequency ranges one after the other. You can set the playing time from 5 to 30 seconds (refer to the section on Programming with DSC-SCANTIME). You can store different values for this setting separately on KeyCard 1 and 2. To scan · press the PS/MIX for longer than 2 seconds. The radio will play all of the stations in your current reception range one after the other. Either the frequency or the station symbol will flash in the display. Automatically storing the strongest stations with Travelstore You can store the six stations with the strongest signals sorted according to their signal strength in your current reception area automatically. This function is particularly convenient on longer trips. · Press the FMT button for at least 2 seconds. The radio will search for the strongest FM station signals and store them in the memory level T (Travelstore). When this process has Scanning stored stations with Preset Scan (PS) You can have all of the stations stored in one frequency range played briefly by using the Preset Scan feature. You can set the playing time from 5 to 30 seconds (refer to the section on Programming with DSC-SCANTIME). To scan · press the PS/MIX button briefly. All of the stations stored in that frequency range will be played briefly one after the other. 36 PTY (Program Type) The PTY signal is a method of identifying program types which will be included in future in the RDS data telegram transmitted by radio stations. The program types are divided into news, politics, special information, sport, etc. This will make it possible for you to choose a program according to the type of program you would like to listen to. PTY prepares you for the future with RDS. To switch PTY on or off · press the PTY button. Now you can use the station buttons to select one of six different program types. The station buttons are now program buttons. PTY and Scan In the scan mode, only those stations transmitting the PTY code selected will be scanned. · Select, for example, SPORT on station button 6. [. . . ] The changer will select the next CD available. Scanning tracks (CDC SCAN) In order to scan all of the tracks · press the PS/MIX button for longer than 2 seconds. If you would like to listen to the track currently being played, · then just press PS/MIX once again. After all of the CDs in the magazine have been scanned, then playback will begin as usual. TPM (Track Program Memory) Use TPM to store up to 99 tracks of your choice from this magazine and others. [. . . ]