User manual BLAUPUNKT LUCCA 3.5 EDITION SCANDINAVIA

[. . . ] 27 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 International telephone information . [. . . ] Note: To protect your hearing, the poweron volume is limited to a value of "38". If the volume level was higher when the unit was switched off and the "LAST VOL" setting is selected, the volume will be reset to "38" when the unit is switched on again. When you have finished making your changes, ; twice. Use the mute level. buttons : to set the When you have completed the setting, press either the MENU button 8 or OK ; twice. Use the Telephone Audio/Navigation Audio If your car radio is connected to a mobile telephone or navigation system, then when the telephone is taken "off the hook", or when the navigation system is speaking, the car radio is muted. The telephone conversation or speech output are reproduced via the car radio speakers. This requires the mobile telephone or navigation system to be connected to the car radio as described in the installation instructions. For this you will need the cable with the following Blaupunkt number: 7 607 001 503. Your Blaupunkt dealer can tell you which navigation systems can be used with your car radio. press the MENU button 8 or OK 30 VOLUME ADJUSTMENT If a traffic announcement is received during a telephone call, or while the navigation system is speaking, the traffic announcement is not reproduced until the call or the speech output has finished. If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be heard when the traffic announcement has finished. The volume at which navigation output or telephone calls start is adjusted as follows: Press the MENU button 8. Press the or button : until "TEL/NAVI VOL" appears in the display. Note: Stations that were previously stored in this memory are deleted in the process. Ending SCAN, continuing to listen to a station Press the OK button ;. The scanning process is completed, the station last scanned remains active. Setting the scanning time Press the MENU button 8. Press the or button : repeatedly until "SCANTIME" appears on the display. buttons : to set the desired scanning time. pleted, press the MENU button 8 or OK ; twice. Note: The set scanning time also applies to scanning in the CD and CD changer mode. Hold down the BND / TS button 5 for more than two seconds. The automatic station-storing procedure begins. "TRAVEL-STORE" appears on the display. Once the process is completed, the station stored in FMT memory location 1 is played. Use the Once the setting has been com- Listening to preset stations Select the memory or frequency range. Hold down the preset station button 1 - 6 > of the desired station. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. This information can be received and displayed by your car radio. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. Scanning receivable stations (SCAN) You can briefly listen in to all receivable stations. [. . . ] Play then resumes. > during the Scanning all tracks on all CDs (SCAN) To listen in briefly to all the tracks on all inserted CDs in ascending order, hold down the OK button ; for more than two seconds. "SCAN" appears on the display. 41 CLOCK - TIME CLOCK - Time Briefly displaying the time Press the / DIS 7 button briefly to display the time. Press the buttons : to switch between the 12 and 24-hour mode. Press the MENU button 8 or OK ; once you have completed the setting. Setting the time Setting the time manually To set the time manually, press the MENU button 8. Viewing the time with the car radio switched off and the ignition on To view the time when the car radio is switched off and the ignition is switched on, press the MENU button 8. "MENU" appears on the display. Press the or button : repeatedly until "CLOCKSET" appears on the display. button :. Press the The time appears on the display. [. . . ]