User manual BLAUPUNKT LUCCA 3.5 BENELUX

[. . . ] 23 Quick reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 What you need to know . . . . . . . . . . . . . . . . . . . . . . . . 29 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern German states of Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to a particular regional programme and wish to continue doing so, select "REG ON" in the DSC mode. If you leave the service area of the regional programme you are tuned into, or if you would like to take full advantage of RDS service, switch to "REG OFF" in the DSC mode. The display will briefly indicate whether this function is switched on or off with "REG ON" or "OFF" when you switch on the "AF" function. AF - Alternative frequency The "AF" function makes sure that the radio always tunes into the strongest frequency for the currently selected programme automatically. Press the AF. TA button for approximately 2 seconds, until you hear a beep and "AF" appears in display field 3. While searching for the strongest reception signal, the radio may switch to mute briefly. If "SEARCH" appears in the display when the radio is switched on or one of the stored frequencies recalled, the unit is already automatically searching for an alternative frequency. 31 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS Use the SRC (source) button to select between radio and CD. The CD mode is not available unless a CD has been inserted. Otherwise, "No CD" will appear in the display. Press SRC to switch between the operating modes. The Radio Data System enhances your enjoyment when you listen to FM radio stations. More and more radio stations now broadcast RDS information along with their regular programming. Note: If you attempt to store a station which is already stored, the corresponding station and the station preset will flash in the display if you are in a different memory bank. If desired, stations can also be stored manually in the Travelstore bank, refer to the section on "Storing stations". Recalling stored stations You can recall any stored station at the touch of a button. · Select the waveband by pressing BA/ TS. For FM, also choose the corresponding memory bank by pressing the BA/TS button as many times as necessary until the desired bank appears in the display. · Press the corresponding preset button briefly to recall the station. Changing the scan time The scan time per radio station can be set to between 5 and 20 seconds. For more detailed information, refer to the section on "DSC programming - SCANTIME". 33 PORTUGUÊS You can automatically store the six FM stations with the most powerful signals in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the "BA/TS" button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the name of the strongest station will appear in the display and begin to play. Scanning stations with Radio Scan You can scan through all of the stations in your reception area. To start the Scan function: · Press "SC" for approximately 2 seconds. [. . . ] Refer to the section on "Clock". NEDERLANDS ITALIANO MW OFF - LW, FM only LW OFF - MW, FM only AM OFF - FM only FRANÇAIS AM ON/OFF It is possible to block out one or both of the AM wavebands (MW/LW). This means you will select only the wavebands you want when you press "BA/ TS": AM ON - all wavebands are available ENGLISH DEUTSCH DSC programming CLK. 12/24 DISP. Switches between 12-h and 24-h clock display. Here you can set the clock to permanent display when the audio system is switched off. [. . . ]