User manual BLAUPUNKT LUCCA 5.3 EUROPE SCR

[. . . ] www. blaupunkt. com Mobile Navigation TravelPilot Lucca 5. 3 Operating and installation instructions Long version Device overview 1 2 3 4 5 6 8 7 9 2 : ; < = Device overview 1 VOL -: Decreases the volume 2 On/Off switch: Short press: Starts the device or switches it to idle state. Long press (longer than 3 seconds): Switches the Lucca off. 3 VOL +: Increases the volume 4 Display (touchscreen): All entries and the control of Lucca are carried out in a simple and intuitive way by touching the buttons displayed on the display. 5 Headphone jack 6 SD/MMC card slot 7 Socket for connecting the Lucca to the battery charger or the charger cable for the cigarette lighter. [. . . ] Navigation tools The following navigation tools are shown on the map: Action arrow: Next action and remaining distance to that action. If you continue to approach the next action, a bar is shown on the right. The more the bar is filled, the closer you are to the location of the next action. Route information The lower display line shows the following route information: · · · · Estimated time of arrival Estimated remaining travel time Remaining distance to destination. Current speed Note: The Trip Info menu displays additional information, e. g. ("Additional functions" in this chapter) Speed limit The speed limit is shown in the right area of the map. Note: This information can be displayed only if it is activated in the navigation settings. "Configuring Lucca", "Settings for navigation") Bluetooth connection If you registered a cell phone with the Lucca, this symbol appears on the map: If you touch the symbol, the Bluetooth Menu is called up. For further details, please read the chapter "Bluetooth function". Carsor: Your position (always shown in the centre of the map) Compass: Always points north (for orientation) Top field: Name of the next city and the signpost information 27 Navigation Working with the map Display map Touch the symbol in the main menu u of the Lucca. - or (directly after the destination entry) Touch the symbol in the Detailed u Information menu. Moving and scaling the map To view the desired destination area on the map, you can move the map section and scale it (zoom in/out). Touch one of the symbols to u zoom in or out of the map. u Touch the map and move the map in the desired direction. If you move the map, this symbol is shown on the left side of the bottom display bar. Touch the symbol to return to your u current position. Touching the map u If you touch a city (the street or the point of interest) on the map, the city is selected and its name displayed in the top display bar. The city is selected and its name appears in the top display bar. If several streets are selected, arrow keys are also displayed. Touch the arrow keys to make a selection. This symbol is displayed on the right in the bottom display bar: Touch the symbol to adopt the city as u the destination. The destination guidance is being started. Additional functions Touch the symbol on the map to disu play additional functions. / Touch the symbol to u change between 2D and 3D view. [. . . ] The Lucca does not respond The operating system of the Press the Reset button. The Lucca has no or only a very After switch-on, the Lucca repoor GPS reception. 1 minute until it is ready for navigation. During the initial switch-on, it requires a longer time and a strong GPS signal. [. . . ]