User manual BLAUPUNKT LUCCA MP3 DEUTSCHLAND

[. . . ] BND button (Band) to switch to radio mode, to select the FM memory banks and the MW and LW wavebands. Volume control Keys 1 - 3 Arrow buttons DIS to change the display content. 9 : ; < = > ? @ MENU button to open the basic settings menu. OK button to confirm menu entries and activate the scan function. Keys 4 - 6 Display TRAF button to switch traffic information standby on/off. [. . . ] The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Set the sensitivity level that you buttons 7. want using the When you have finished making your changes, press the MENU button 9 or the OK button :. Note: You can set different sensitivity levels for FM and MW or LW (AM). Press and hold down the BND·TS button 4 for longer than two seconds. "FM TSTORE" appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. 45 RADIO MODE Listening to stored stations Select the memory bank or waveband. When you have finished making your changes, press the MENU button 9 twice or the OK button : twice. Note: The scanning time that you set is also applied by the system to scanning carried out in CD/MP3 and CD-changer mode. Press the station button 1 - 3 6 or 4 - 6 ; that the station you want to listen to is assigned to. Scanning receivable stations (SCAN) You can use the scan function to briefly play all the receivable stations. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. Press the or button 7 repeatedly until "HICUT" appears in the display. or button 7 to adjust the HICUT setting. "HICUT 0" means that no automatic reduction of the treble and interference level will be made; "HICUT 1" means that a maximum reduction will be made. Press the Switching traffic information priority on/off Press the TRAF button =. Traffic announcement priority is active when a traffic-jam symbol lights up in the display. Note: You will hear a warning sound: if you leave the reception area of a traffic information station that you are currently listening to. if, while listening to a CD/MP3 or CD in the changer, you leave the reception area of a traffic information station that the system is tuned into, and the subsequent automatic search cannot find a new traffic information station. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. Press the MENU button 9 or the OK button :. Configuring the display You have the option in radio mode of displaying the waveband together with the memory location or time in the lower display area. Briefly press the DIS button 8 to switch between the two options. 48 TRAFFIC INFORMATION If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. CD MODE You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, read the chapter entitled "MP3 mode". Contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Setting the volume for traffic announcements Press the MENU button 9. Press the or button 7 repeatedly until "TA VOLUME" appears in the display. Adjust the volume using the buttons 7. [. . . ] Press the or button 7 repeatedly until the setting that you want appears in the display. When you have finished making your changes, press the AUDIO button >. press the X-BASS button ?. 62 CONFIGURING THE LEVEL DISPLAY / ADJUSTING THE BRIGHTNESS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Configuring the level display The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. When you are not changing any settings, the level display depicts the sound system's output level. You can switch the level display on/off. Press the or button 7 repeatedly until "DIM DAY" or "DIM NIGHT" appears in the display. or button 7 to switch between the brightness levels. [. . . ]