User manual BLAUPUNKT LUCCA MP3 EDITION EUROPE

[. . . ] 40 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Telephone mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 KeyCard theft protection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To select a scanned station and switch off the Radio-Scan function: · Press SC/MIX briefly. If no station is selected, the scan function will be automatically switched off after the frequency band has been run through completely. The unit will tune in the station listened to before starting the scan. Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the FMT button for two seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manually on the Travelstore bank (see "Storing stations"). · Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned on all wavebands. Note that the Preset Scan function can only be started if PTY is switched off ("PTY" does not light up in the display). · Press the PTY button if required. Each time the radio is switched on, stereo playback is activated. The unit will automatically switch to mono if the received signal is not strong enough for stereo playback. Programme type Use << >> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6. Using DSC you can choose between German and English (see "DSC programming PTY LANG"). All of the programme types listed below are available. 46 Displaying the selected programme type · Press << or >>. The programme type selected last will be displayed briefly. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. · Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds. If you wish to listen to a station with this PTY, press / to start seek tuning operation. If the system is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be released. [. . . ] Try out which SPEECH setting you like most. BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second. The volume can be adjusted from between 0 to 9. (0 = off). / << >> Select function Adjust/recall value 58 ANGLE Use this setting to alter the viewing angle to your liking from -1 to 0 to +1. [. . . ]